LBC3225T3R3MR 概述
WOUND CHIP INDUCTORS 绕线贴片电感 固定电感器
LBC3225T3R3MR 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 包装说明: | 1210 |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8504.50.80.00 | Factory Lead Time: | 12 weeks |
风险等级: | 1.29 | Is Samacsys: | N |
大小写代码: | 1210 | 构造: | Chip |
型芯材料: | FERRITE | 直流电阻: | 0.1235 Ω |
标称电感 (L): | 3.3 µH | 电感器应用: | RF INDUCTOR |
电感器类型: | GENERAL PURPOSE INDUCTOR | JESD-609代码: | e3 |
功能数量: | 1 | 端子数量: | 2 |
最高工作温度: | 105 °C | 最低工作温度: | -40 °C |
封装高度: | 2.5 mm | 封装长度: | 3.2 mm |
封装形式: | SMT | 封装宽度: | 2.5 mm |
包装方法: | Tape, Embossed | 最大额定电流: | 0.82 A |
自谐振频率: | 160 MHz | 形状/尺寸说明: | RECTANGULAR PACKAGE |
屏蔽: | NO | 特殊特征: | DCR IS MEASURED AT 30% TOLERANCE |
表面贴装: | YES | 端子面层: | Tin (Sn) - with Nickel (Ni) barrier |
端子位置: | DUAL ENDED | 端子形状: | WRAPAROUND |
测试频率: | 0.1 MHz | 容差: | 20% |
Base Number Matches: | 1 |
LBC3225T3R3MR 数据手册
通过下载LBC3225T3R3MR数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
(
)
WOUND CHIP INDUCTORS LB SERIES
REFLOW
■ FEATURES
■ APPLICATIONS
Wound Chip Inductors cover customers' wide range module designs by
wide-line-up shape, standard, low Rdc, and high electric current series.
◦Dꢀ SC/DVC/HDD, LCD, portable telephones, game equipments.
ꢀ Various audio-visual equipments, various communication equipments,
etc.
◦ꢀLB/LBR Series:Super low Rdc and high Idc characteristics.
◦ꢀLB3218 Series: This series is downsized from 3225 size. Land pat-
tern can be used by 3225 size.
◦LBMF1608
The best efficiency design is achieved by adopting bottom-surface elec-
trode structure. Because of 1608 shape, it can be high-density mounting.
■ ORDERING CODE
L B △ 2 0 1 2 T 1 0 0 △ △ △ △ △
❶
❷
❸
❹
❺
❻
❼
❽
❶Type
LB Wound chip inductor
❸External Dimensions
〔mm〕
❹Packaging
Tape & Reel
❺Nominal
❻Inductance
❼Special
❽Internal code
Inductance〔μH〕
Tolerances〔%〕
K
code
T
Standard
Products
△△△
1608(0603) 1.6×0.8
2012(0805) 2.0×1.25
2016(0806) 2.0×1.6
2518(1007) 2.5×1.8
3218(1207) 3.2×1.8
3225(1210) 3.2×1.5
example
±10
±20
Standard
products
△
1R0
100
101
1
M
△=Blank space
❷Shape
Standard products
Low Rdc
type
10
△
C
R
100
High current
Low Rdc
※R=decimal point
R
Bottom-surface
electrode
MF
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
EXTERNAL DIMENSIONS
Standard Quantity [pcs]
Type
L
W
T
e
C
Paper
Tape
Embossed
Tape
3.2±0.2
2.5±0.2
2.5±0.2
0.6±0.3
LBC3225
LB3218
-
-
1000
2000
(0.128±0.008) (0.098±0.008) (0.098±0.008) (0.024±0.012)
A
B
A
3.2±0.2
1.8±0.2
1.8±0.2
0.6±0.2
(0.128±0.008) (0.071±0.008) (0.071±0.008) (0.024±0.008)
LB2518
LBC2518
LBR2518
Unit:mm
C
2.5±0.2 1.8±0.2 1.8±0.2 0.5±0.2
-
-
-
2000
2000
2000
-
Surface Mounting
(0.098±0.008) (0.071±0.008) (0.071±0.008) (0.020±0.008)
TYPE
1608
A
B
・ Mounting and soldering con-
ditions should be checked
beforehand.
・ Applicable soldering process
to those products is reflow
soldering only.
0.55
0.7
0.8
0.8
0.8
1.2
1.6
1.6
1.0
LB2016
LBC2016
2.0±0.2 1.6±0.2 1.6±0.2 0.5±0.2
MF1608 0.55
0.9
(0.079±0.008) (0.063±0.008) (0.063±0.008) (0.020±0.008)
2.0±0.2 1.25±0.2 1.25±0.2 0.5±0.2
2012
2016
2518
3218
3225
0.7
0.7
0.8
1.0
1.0
1.45
1.8
LB2012
LBC2012
LBR2012
(0.079±0.008) (0.049±0.008) (0.049±0.008) (0.020±0.008)
2.0
・
Recommended Land Patterns
1.6±0.1 0.8±0.1 0.8±0.1 0.35±0.15
2.0
LB1608
4000
(0.063±0.004) (0.031±0.004) (0.031±0.004) (0.014±0.006)
1.6±0.2 0.8±0.2 0.8±0.2 0.45±0.15
(0.063±0.008) (0.031±0.008) (0.031±0.008) (0.016±0.006)
2.0
LBMF1608
-
3000
Unit:mm(inch)
■ AVAILABLE CAPACITANCE RANGE
Type
LB3218
LB2518
LB2016
LB2012
LB1608
LBC3225
LBC2518
LBC2016
LBC2012
LBR2518
LBR2012
LBMF1608
Range
Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω] Imax[. mA]ꢁRdc±30%[Ω]
1075 1μH 0.06
665
165
60
1μH 0.06
0.25
490
155
40
1μH 0.09
405
120
45
1μH 0.15
160
70
1μH 0.17 1100 1μH 0.055 775
1μH 0.08
690
245
75
1μH
0.1
0.82
8.0
620
1μH 0.19
960
235
80
1μH 0.045 400
1μH 0.07
0.36
230
1μH 0.09
1
10
0.55
340
140
0.25
2.40
0.5
0.7
60
0.7
540
0.133 375
0.36
200
90
1.2
5.8
0.19
150
80
35
0.36
2.5
10μH
47μH
47μH
2.1
4.5
7.0
150
1.4
125
45
3.70
1.89
50
4.0
100
100μH
100μH
100μH
100μH
100μH
100μH
28.0
40
27
15
24
680μH
1000
1000μH
1000μH
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound01_e-01
42
■ PART NUMBERS
●LB1608 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB 1608T1R0M
LB 1608T2R2M
LB 1608T4R7M
LB 1608T8R2M
LB 1608T100M
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
4.7
8.2
10
100
80
45
32
0.17
0.33
0.55
0.70
0.70
160
115
70
7.96
2.52
±20%
60
32
60
●LB2012 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB 2012T1R0M
LB 2012T2R2M
LB 2012T3R3M
LB 2012T4R7M
LB 2012T6R8M
LB 2012T100□
LB 2012T100□R
LB 2012T150□
LB 2012T220□
LB 2012T470□
LB 2012T680□
LB 2012T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
100
80
55
45
38
32
32
28
16
11
10
8
0.15
0.23
0.30
0.40
0.47
0.70
0.50
1.3
405
260
235
190
135
120
120
100
80
±20%
7.96
10
15
2.52
±10%
±20%
22
1.7
47
3.7
60
68
6.0
50
100
7.0
45
0.796
●LB2016 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB 2016T1R0M
LB 2016T1R5M
LB 2016T2R2M
LB 2016T3R3M
LB 2016T4R7M
LB 2016T6R8M
LB 2016T100□
LB 2016T150□
LB 2016T220□
LB 2016T330□
LB 2016T470□
LB 2016T680□
LB 2016T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
80
70
55
45
38
32
28
16
14
11
10
8
0.09
0.11
0.13
0.20
0.25
0.35
0.50
0.70
1.0
490
380
375
285
225
200
155
130
105
85
±20%
7.96
15
22
2.52
±10%
±20%
33
1.7
47
2.4
70
68
3.0
55
100
4.5
40
0.796
●LB2518 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB 2518T1R0M
LB 2518T1R5M
LB 2518T2R2M
LB 2518T3R3M
LB 2518T4R7M
LB 2518T4R7MR
LB 2518T6R8M
LB 2518T100□
LB 2518T150□
LB 2518T220□
LB 2518T330□
LB 2518T470□
LB 2518T680□
LB 2518T101□
LB 2518T151□
LB 2518T221□
LB 2518T331□
LB 2518T471□
LB 2518T681□
LB 2518T102□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
4.7
6.8
10
100
80
0.06
0.07
0.09
0.11
0.13
0.10
0.15
0.25
0.32
0.50
0.70
0.95
1.5
665
405
340
280
240
235
195
165
145
115
95
68
±20%
54
7.96
2.52
46
46
38
30
15
23
22
19
33
15
47
12
85
68
9.5
9.0
7.0
5.5
4.5
3.5
3.0
2.4
70
±10%
±20%
100
150
220
330
470
680
1000
2.1
60
3.2
45
4.5
40
0.796
0.252
7.0
30
10
25
17
20
24
15
・□Please specify the Inductance tolerance code(K or M)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound01_e-01
43
■ PART NUMBERS
●LB3218 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB 3218T1R0M
LB 3218T1R5M
LB 3218T2R2M
LB 3218T3R3M
LB 3218T4R7M
LB 3218T6R8M
LB 3218T100□
LB 3218T150□
LB 3218T220□
LB 3218T330□
LB 3218T470□
LB 3218T680□
LB 3218T101□
LB 3218T151□
LB 3218T221□
LB 3218T331□
LB 3218T471□
LB 3218T681□
LB 3218T102□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
80
68
54
41
0.06
0.07
0.09
0.11
0.13
0.17
0.25
0.32
0.49
0.75
0.92
1.49
2.4
1075
860
775
560
550
380
340
300
255
215
205
145
140
105
80
±20%
7.96
2.52
40
30
25
15
22
19
33
15
47
12
68
11
±10%
±20%
100
150
220
330
470
680
1000
8.0
7.0
5.0
4.0
3.5
3.0
2.4
3.2
5.4
0.796
0.252
7.0
65
14
54
17
45
27
39
●LBMF1608 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LBMF1608T1R0M
LBMF1608T2R2M
LBMF1608T3R3M
LBMF1608T4R7M
LBMF1608T100□
LBMF1608T220□
LBMF1608T470□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
10
100
80
60
45
32
16
11
0.09
0.17
0.22
0.24
0.36
1.0
230
160
130
110
80
±20%
7.96
2.52
±10%
±20%
22
50
47
2.5
35
●LBC3225 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB C3225T1R0MR
LB C3225T1R5MR
LB C3225T2R2MR
LB C3225T3R3MR
LB C3225T4R7MR
LB C3225T6R8MR
LB C3225T100□R
LB C3225T150□R
LB C3225T220□R
LB C3225T330□R
LB C3225T470□R
LB C3225T680□R
LB C3225T101□R
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
250
220
190
160
70
50
23
20
17
0.055
0.060
0.080
0.095
0.100
0.120
0.133
0.195
0.270
0.410
0.670
1.00
1100
1000
930
820
680
620
540
420
330
300
220
190
150
±20%
0.1
15
22
±10%
±20%
33
13
47
10
68
8
100
6
1.40
●LBC2518 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB C2518T1R0M
LB C2518T1R0MR
LB C2518T1R5M
LB C2518T2R2M
LB C2518T3R3M
LB C2518T4R7M
LB C2518T6R8M
LB C2518T100□
LB C2518T150□
LB C2518T220□
LB C2518T330□
LB C2518T470□
LB C2518T680□
LB C2518T101□
LB C2518T151□
LB C2518T221□
LB C2518T331□
LB C2518T471□
LB C2518T681□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.0
1.5
2.2
3.3
4.7
6.8
10
100
100
80
0.08
0.065
0.11
0.13
0.16
0.20
0.30
0.36
0.65
0.77
1.5
775
890
730
630
560
510
420
375
285
250
185
165
140
125
95
±20%
68
7.96
54
41
38
30
15
23
22
19
2.52
33
15
47
12
1.9
68
9.5
9.0
7.0
5.5
4.5
4.5
3.0
2.8
±10%
±20%
100
150
220
330
470
680
3.7
6.1
8.4
80
0.796
12.3
22
65
50
28
45
・□Please specify the Inductance tolerance code(K or M)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound01_e-01
44
■ PART NUMBERS
●LBC2016 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB C2016T1R0M
LB C2016T1R5M
LB C2016T2R2M
LB C2016T3R3M
LB C2016T4R7M
LB C2016T6R8M
LB C2016T100□
LB C2016T150□
LB C2016T220□
LB C2016T330□
LB C2016T470□
LB C2016T680□
LB C2016T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
80
70
55
45
38
32
28
16
14
11
10
8
0.10
0.15
0.20
0.27
0.37
0.59
0.82
1.2
690
600
520
410
355
290
245
200
165
135
110
95
±20%
7.96
15
22
1.8
2.52
±10%
±20%
33
2.8
47
4.3
68
7.0
100
8.0
75
0.796
●LBC2012 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB C2012T1R0M
LB C2012T2R2M
LB C2012T4R7M
LB C2012T100□
LB C2012T220□
LB C2012T470□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
4.7
10
100
70
45
40
16
0.19
0.33
0.50
1.2
620
430
295
200
130
90
±20%
7.96
2.52
±10%
±20%
22
3.7
47
11
5.8
●LBR2518 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB R2518T1R0M
LB R2518T2R2M
LB R2518T4R7M
LB R2518T100□
LB R2518T220□
LB R2518T470□
LB R2518T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
4.7
10
100
68
45
30
19
11
9
0.045
0.07
0.10
0.19
0.44
0.84
1.89
960
480
345
235
175
120
80
±20%
7.96
22
2.52
±10%
±20%
47
100
0.796
●LBR2012 TYPE
EHS
(Environmental
Hazardous
DC
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance Self-resonant frequency
Rated current
〔mA〕max.
Ordering code
Resistance
〔Ω(〕±30%)
Tolerance
〔MHz〕min.
Substances)
LB R2012T1R0M
LB R2012T2R2M
LB R2012T4R7M
LB R2012T100□
LB R2012T220□
LB R2012T470□
LB R2012T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
4.7
10
100
80
45
32
16
11
8
0.07
0.13
0.24
0.36
1.0
400
260
200
150
100
75
±20%
7.96
22
2.52
±10%
±20%
47
1.7
100
4.0
50
0.796
・□Please specify the Inductance tolerance code(K or M)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound01_e-01
45
■ ELECTRICAL CHARACTERISTICS
DC Bias characteristics(Measured by HP4285A+42841A)
■
Standard Type
LB1608
LB2012
LB2016
LB2518
100
10
1000
100
10
1000
100
10
1000
100
10
101□
101□
101□
100M
100□
100□
100□
1R0M
1
1R0M
1R0M
1R0M
1
1
1
0.1
0.1
0.1
0.1
1
1
1
10
100
1000
1
1
1
10
100
1000
10000
1
1
1
1
1
1
10
100
1000
10000
1
10
100
1000
10000
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
Standard Type
High Current Type
LB3218
LBC2012
LBC2016
LBC2518
1000
100
10
100
10
1000
100
10
1000
100
10
470□
101□
100□
101□
101□
100□
100□
100□
1R0M
1
1R0M
1R0M
1R0M
1
1
1
0.1
0.1
0.1
0.1
10
100
1000
10000
10
100
1000
10
100
1000
10000
1
10
100
1000
10000
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
High Current Type
Low Rdc Type
Bottom-surface electrode Type
LBC3225
LBR2012
LBR2518
LBMF1608
100
10
1000
100
1000
100
10
10
100□
101□R
4R7M
101□
101□
100□R
1R0M
100□
1
1R0MR
100□
1
10
1
1R0M
1
1R0M
0.1
0.1
0.1
10
100
1000
10000
10
100
1000
10000
10000
10000
10
100
1000
10000
1
1
1
10
100
1000
10000
10000
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
Impedance-vs-Frequency characteristics(Measured by HP4291A)
■
Standard Type
LB1608
LB2012
101□
100□
LB2016
LB2518
10000
1000
100
100000
10000
1000
100000
10000
100000
10000
1000
100
101□
101□
100M
100□
1R0M
100□
1R0M
1R0M
1R0M
1000
100
100
10
1
10
1
10
10
1
1
1
10
100
1000
10000
1
1
1
10
100
1000
10
100
1000
10000
10
100
1000
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
Standard Type
High Current Type
LB3218
LBC2012
LBC2016
LBC2518
100000
10000
100000
10000
100000
10000
100000
10000
1000
101□
101□
100□
101□
470□
100□
100□
100□
1R0M
1R0M
1R0M
1R0M
1000
100
10
1000
100
10
1000
100
100
10
1
10
1
1
1
1
10
100
1000
10000
10
100
1000
10
100
1000
10000
10
100
1000
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
High Current Type
Low Rdc Type
Bottom-surface electrode Type
LBC3325
LBR2012
LBR2518
LBMF1608
100000
10000
100000
10000
1000
100000
10000
1000
100
100000
101□R
100□R
101□
101□
470□
10000
100□
100□
1R0MR
100□
1R0M
1000
100
10
1R0M
4R7M
1000
100
100
10
10
1
10
1
1
1
0.1
0.1
1
10
100
1000 10000
10
100
1000
10
100
1000
10000
1
10
100
1000
10000
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound01_e-01
46
(
)
WOUND CHIP POWER INDUCTORS CB SERIES
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀThis series corresponds to high electric current compared with LB/
LBC series.
Wound Chip Inductors that can be used for small DC/DC converters
and are suitable for choke uses.
◦Dꢀ SC/DVC/HDD, LCD, portable telephones, game equipment.
Various audio-visual equipment, various communication equipment,
etc.
◦ꢀCBMF 1608 Series
The best efficiency design is achieved by adopting bottom-surface
electrode structure.
Wound Chip Inductors that are suitable for module design which
needs high electric current like DC/DC converters.
■ ORDERING CODE
C B △ 2 0 1 2 T 1 0 0 △ △ △ △ △
❶
❷
❸
❹
❺
❻
❼
❽
❶Type
❸External Dimensions
〔mm〕
❹Packaging
Tape & Reel
❺Nominal
❻
Inductance
Tolerance〔s %〕
❼Special
❽Internal code
Inductance〔μH〕
code
CB Wound chip power inductor
T
Standard
Products
△△△
1608(0603) 1.6×0.8
2012(0805) 2.0×1.25
2016(0806) 2.0×1.6
2518(1007) 2.5×1.8
3225(1210) 3.2×2.5
example
K
±10
±20
Standard
products
△
△=Blank space
1R0
100
101
1
M
❷Characteristic Spec
Low Rdc
type
10
△
C
L
Low Rdc
High current
Low profile
R
100
※R=decimal point
MF Bottom-surface electrode
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Standard Quantity [pcs]
Type
L
W
T
e
Paper
Tape
Embossed
Tape
C
3.2±0.2
2.5±0.2
2.5±0.2
0.6±0.3
CBC3225
-
-
1000
2000
2000
2000
-
(0.126±0.008) (0.098±0.008) (0.098±0.008) (0.024±0.012)
CB2518
CBC2518
2.5±0.2
1.8±0.2
1.8±0.2
0.5±0.2
A
B
A
(0.098±0.008) (0.071±0.008) (0.071±0.008) (0.020±0.008)
CB2016
CBC2016
2.0±0.2 1.6±0.2 1.6±0.2 0.5±0.2
(0.079±0.008) (0.063±0.008) (0.063±0.008) (0.020±0.008)
2.0±0.2 1.25±0.2 1.25±0.2 0.5±0.2
(0.079±0.008) (0.049±0.008) (0.049±0.008) (0.020±0.008)
2.0±0.2 1.25±0.2 0.9±0.1 0.5±0.2
(0.079±0.008) (0.049±0.008) (0.035±0.004) (0.020±0.008)
1.6±0.2 0.8±0.2 0.8±0.2 0.45±0.15
(0.063±0.2) (0.031±0.008) (0.031±0.008) (0.016±0.006)
-
Recommended Land Patterns
Unit:mm
C
TYPE
1608
A
B
CB2012
CBC2012
-
Surface Mounting
0.55
0.7
0.8
0.8
0.8
1.2
1.6
1.0
・Mounting and soldering con-
ditions should be checked
beforehand.
・Applicable soldering process
to those products is reflow
soldering only.
MF1608 0.55
0.9
CBL2012
4000
-
2012
2016
2518
3225
0.7
0.7
0.8
1.0
1.45
1.8
CBMF1608
3000
2.0
Unit:mm(inch)
2.0
・Recommended Land Patterns
■ AVAILABLE CAPACITANCE RANGE
Type
CB2518
CB2016
CB2012
CBC3225
CBC2518
CBC2016
CBC2012
CBC2012
CBMF1608
Range
Imax[mA]ꢁRdc±30%[Ω] Imax[mA]ꢁRdc±30%[Ω] Imax[mA]ꢁRdc±30%[Ω] Imax[mA]ꢁRdc±30%[Ω] Imax[mA]ꢁRdc±30%[Ω] Ima[x mA]ꢁRdc±30%[Ω] Imax[mA]ꢁRdc±30%[Ω] Imax[mA]ꢁRdc±30%[Ω] Imax[mA]ꢁRdc±30%[Ω]
1
1200
1μH
0.06
0.09
2.40
0.95
2.1
600
510
250
110
70
1μH
0.09
0.13
0.5
500
410
200
90
1μH
0.15
0.23
0.5
3.7
7
1440
1130
900
390
1μH 0.055 1000
1μH
0.08
0.13
0.36
1.90
1100
750
380
150
110
1μH
0.1
0.2
0.82
4.3
8
700
530
240
120
1μH
0.19
0.33
1.2
620
530
440
100
1μH
0.15
0.33
1.0
350
230
115
50
1μH
0.09
0.17
0.36
2.5
22 510
10 250
47 110
100 60
0.08
0.133
0.67
1.4
890
480
240
2.4
5.8
4.2
47μH
47μH
47μH
4.5
60
270
160
65
3.7
28
100μH
100μH
100μH
100μH
1000 25
24
680μH
1000μH
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound02_e-01
48
■ PART NUMBERS
●CB2012 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
Ordering code
Saturation current
Idc1
current
Idc2
Substances)
CB 2012T1R0M
CB 2012T2R2M
CB 2012T3R3M
CB 2012T4R7M
CB 2012T6R8M
CB 2012T100□
CB 2012T100□R
CB 2012T150□
CB 2012T220□
CB 2012T470□
CB 2012T680□
CB 2012T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
100
80
55
45
38
32
32
28
16
11
10
8
0.15
0.23
0.30
0.40
0.47
0.70
0.50
1.3
500
410
330
300
250
190
200
170
135
90
900
770
650
580
540
440
520
320
280
190
140
130
±20%
7.96
10
15
2.52
±10%
±20%
22
1.7
47
3.7
68
6.0
70
100
7.0
60
0.796
●CB2016 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
current
Ordering code
Saturation current
Idc1
Substances)
Idc2
CB 2016T1R0M
CB 2016T1R5M
CB 2016T2R2M
CB 2016T3R3M
CB 2016T4R7M
CB 2016T6R8M
CB 2016T100□
CB 2016T150□
CB 2016T220□
CB 2016T330□
CB 2016T470□
CB 2016T680□
CB 2016T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
80
70
55
45
38
32
28
16
14
11
10
8
0.09
0.11
0.13
0.20
0.25
0.35
0.50
0.70
1.0
600
550
510
400
340
300
250
210
165
130
110
90
1100
1000
1000
800
740
600
520
440
370
270
240
210
170
7.96
±20%
15
22
2.52
±10%
±20%
33
1.7
47
2.4
68
3.0
100
4.5
70
0.796
●CB2518 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
current
Ordering code
Saturation current
Idc1
Substances)
Idc2
CB 2518T1R0M
CB 2518T1R5M
CB 2518T2R2M
CB 2518T3R3M
CB 2518T4R7MR
CB 2518T4R7M
CB 2518T6R8M
CB 2518T100□
CB 2518T150□
CB 2518T220□
CB 2518T330□
CB 2518T470□
CB 2518T680□
CB 2518T101□
CB 2518T151□
CB 2518T221□
CB 2518T331□
CB 2518T471□
CB 2518T681□
CB 2518T102□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
4.7
6.8
10
100
80
0.06
0.07
0.09
0.11
0.10
0.13
0.15
0.25
0.32
0.50
0.70
0.95
1.5
1200
650
510
440
310
340
270
250
180
165
130
110
70
1500
1400
1300
1200
1200
1100
930
820
650
580
460
420
310
68
±20%
54
7.96
2.52
46
46
38
30
15
23
22
19
33
15
47
12
68
9.5
9.0
7.0
5.5
4.5
3.5
3.0
2.4
±10%
±20%
100
150
220
330
470
680
1000
2.1
60
260
210
180
140
120
90
3.2
55
4.5
50
0.796
0.252
7.0
40
10
35
17
30
24
25
75
●CBC2012 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
current
Ordering code
Saturation current
Idc1
Substances)
Idc2
CB C2012T1R0M
CB C2012T2R2M
CB C2012T4R7M
CB C2012T100□
CB C2012T220□
CB C2012T470□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
4.7
10
100
70
45
40
16
0.19
0.33
0.50
1.2
700
530
360
240
170
120
840
640
520
340
190
150
±20%
7.96
2.52
±10%
±20%
22
3.7
47
11
5.8
・□Please specify the Inductance tolerance code(Kor M)
※)The saturation current value(Idc1)is the DC current value having inductance decrease down to 30%.(at 20℃)
※)The temperature rise current value(Idc2)is the DC current value having temperature increase up to 40℃.(at 20℃)
※)The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound02_e-01
49
■ PART NUMBERS
●CBC2016 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
Ordering code
Saturation current
Idc1
current
Idc2
Substances)
CB C2016T1R0M
CB C2016T1R5M
CB C2016T2R2M
CB C2016T3R3M
CB C2016T4R7M
CB C2016T6R8M
CB C2016T100□
CB C2016T150□
CB C2016T220□
CB C2016T330□
CB C2016T470□
CB C2016T680□
CB C2016T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
80
70
55
45
38
32
28
16
14
11
10
8
0.10
0.15
0.20
0.27
0.37
0.59
0.82
1.2
1100
1000
750
600
550
450
380
300
250
220
150
130
110
1100
1000
720
610
530
450
350
300
240
220
150
130
110
7.96
±20%
15
22
1.8
2.52
±10%
±20%
33
2.8
47
4.3
68
7.0
100
8.0
0.796
●CBC2518 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
current
Ordering code
Saturation current
Idc1
Substances)
Idc2
CB C2518T1R0M
CB C2518T1R5M
CB C2518T2R2M
CB C2518T3R3M
CB C2518T4R7M
CB C2518T6R8M
CB C2518T100□
CB C2518T150□
CB C2518T220□
CB C2518T330□
CB C2518T470□
CB C2518T680□
CB C2518T101□
CB C2518T151□
CB C2518T221□
CB C2518T331□
CB C2518T471□
CB C2518T681□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
80
0.08
0.11
0.13
0.16
0.20
0.30
0.36
0.65
0.77
1.5
1000
950
890
730
680
550
480
350
320
270
240
200
160
140
115
100
80
1200
1190
1100
1020
920
740
680
500
460
320
290
200
170
130
110
90
68
7.96
±20%
54
41
38
30
15
23
22
19
2.52
33
15
47
12
1.9
68
9.5
9.0
7.0
5.5
4.5
3.5
3.0
2.8
±10%
±20%
100
150
220
330
470
680
3.7
6.1
8.4
0.796
12.3
22
70
28
65
60
●CBC3225 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
current
Ordering code
Saturation current
Idc1
Substances)
Idc2
CB C3225T1R0MR
CB C3225T1R5MR
CB C3225T2R2MR
CB C3225T3R3MR
CB C3225T4R7MR
CB C3225T6R8MR
CB C3225T100□R
CB C3225T150□R
CB C3225T220□R
CB C3225T330□R
CB C3225T470□R
CB C3225T680□R
CB C3225T101□R
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
250
220
190
160
70
50
23
20
17
13
10
8
0.055
0.06
0.08
0.095
0.10
0.12
0.133
0.195
0.27
0.41
0.67
1.0
2000
2000
2000
2000
1250
950
1440
1310
1130
1040
1010
940
±20%
900
900
0.1
15
730
850
22
620
780
±10%
±20%
33
500
570
47
390
480
68
320
410
100
6
1.4
270
340
●CBL2012 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
current
Ordering code
Saturation current
Idc1
Substances)
Idc2
CB L2012T1R0M
CB L2012T2R2M
CB L2012T4R7M
CB L2012T100M
CB L2012T220M
CB L2012T470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
4.7
10
100
80
45
32
23
11
0.15
0.39
0.66
1.0
620
440
275
205
150
100
950
590
490
370
250
140
±20%
0.1
22
2.1
47
4.2
・□Please specify the Inductance tolerance code(Kor M)
※)The saturation current value(Idc1)is the DC current value having inductance decrease down to 30%.(at 20℃)
※)The temperature rise current value(Idc2)is the DC current value having temperature increase up to 40℃.(at 20℃)
※)The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound02_e-01
50
■ PART NUMBERS
●CBMF1608 TYPE
Rated current〔mA〕
EHS
(Environmental
Hazardous
Self-resonant
frequency
〔MHz〕
min.
Resistance
DC
〔Ω(〕±30%)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Temperature rise
Ordering code
Saturation current
Idc1
current
Idc2
Substances)
CBMF1608T1R0M
CBMF1608T2R2M
CBMF1608T3R3M
CBMF1608T4R7M
CBMF1608T100□
CBMF1608T220□
CBMF1608T470□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
10.0
22
100
80
60
45
32
16
11
0.09
0.17
0.22
0.24
0.36
1.0
290
190
170
145
115
70
770
560
500
470
380
230
140
±20%
7.96
2.52
±10%
±20%
47
2.5
50
・□Please specify the Inductance tolerance code(Kor M)
※)The saturation current value(Idc1)is the DC current value having inductance decrease down to 30%.(at 20℃)
※)The temperature rise current value(Idc2)is the DC current value having temperature increase up to 40℃.(at 20℃)
※)The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound02_e-01
51
■ ELECTRICAL CHARACTERISTICS
DC Bias characteristicsꢁMeasured by HP4285A+42841A
■
Low Rdc Type
CB2012
CB2016
CB2518
1000
100
10
1000
100
10
1000
100
10
101□
101□
101□
100□
100□
100□
1R0M
1R0M
1R0M
1
1
1
0.1
0.1
0.1
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
High Current Type
CBC2012
CBC2016
CBC2518
CBC3225
100
10
1000
100
10
1000
100
10
470□
101□R
101□
100□
101□
100
10
1
100□
100□R
100□
1R0M
1R0MR
1
1
1R0M
1R0M
1
0.1
0.1
0.1
0.1
1
10
100
1000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
DC Bias〔mA〕
Low Profile Type
Bottom-surface electrode Type
CBL2012
CBMF1608
100
10
1
100
100□
470M
4R7M
10
100M
1R0M
4R7M
1
1
10
100
1000
1
10
100
1000
DC Bias〔mA〕
DC Bias〔mA〕
Impedance-vs-Frequency characteristicsꢁMeasured by HP4291A
■
Low Rdc Type
CB2012
CB2016
101□
CB2518
100000
10000
100000
10000
100000
10000
101□
101□
100□
100□
100□
1R0M
1R0M
1R0M
1000
100
10
1000
100
10
1000
100
10
1
1
1
1
1
1
10
100
1000
10000
10000
1000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
High Current Type
CBC2012
CBC2016
CBC2518
CBC3225
100000
10000
100000
10000
100000
10000
100000
10000
101□
100□
1R0M
101□R
100□R
101□
470□
100□
100□
1R0MR
1R0M
1R0M
1000
100
10
1000
100
10
1000
100
10
1000
100
10
1
1
1
1
10
100
1000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
Frequency〔MHz〕
Low Profile Type
Bottom-surface electrode Type
CBL2012
CBMF1608
100000
100000
470M
470□
100□
10000
1000
100
10
10000
1000
100
10
100M
4R7M
4R7M
1
1
10
100
1
10
100
1000
10000
Frequency〔MHz〕
Frequency〔MHz〕
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound02_e-01
52
(
)
WOUND CHIP INDUCTORS FOR SIGNAL LINE LB/LE SERIES M TYPE
REFLOW
WAVE
REFLOW
L B:
L E:
■ FEATURES
■ APPLICATIONS
◦ꢀLBM2016 Series
◦Dꢀ SC/DVC/HDD, LCD, portable telephones, game equipment.
Various audio-visual equipment, various communication equipment,
etc.
High Q and narrow tolerance are achieved by adopting bottom-sur-
face electrode structure.Wound Chip Inductors that are suitable for
module design of signal line uses.
◦ꢀLEM2520 Series
A high-quality inductor that is simple to mass-produce and conforms
to the same production process and basic construction as an axial
lead type inductor.
■ ORDERING CODE
L B M 2 0 1 6 T 1 0 0 J △
❶
❷
❸
❹
❺
❻
❶Type
Wound chip inductor for
signal line
❷External
❸Packaging
Tape & Reel
❹Nominal
❺
Inductance
Tolerances
❻Internal code
Dimensions〔mm〕
Inductance〔μH〕
T
Standard
Products
LBM
LEM
△
2016
2.0×1.6
2.5×2.0
example
J
±5%
±10%
Wound chip inductor for
signal line
2520
R12
1R0
100
0.12
1.00
10.0
K
△=Blank space
※R=decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
■ AVAILABLE CAPACITANCE RANGE
Type
LBM2016
LEM2520
LBM2016
LEM2520
Range
Idc[mA]
Rdc±30%[Ω] Idc[mA]
Rdc±30%[Ω]
610
385
215
80
0.13
0.38
1.20
8.00
520
245
155
60
0.37
0.12
1.0
10
1.10
e
e
3.50
21.00
Standard Quantity [pcs]
100
Type
L
W
T
e
W
100μH
100μH
Paper Tape
Embossed Tape
2.0±0.2
1.6±0.2
1.6±0.2
0.5±0.2
LBM2016
LEM2520
(0.08±0.008) (0.063±0.008)(0.063±0.008) (0.02±0.008)
-
2000
2.5±0.2
2.0±0.2
1.8±0.2
0.45
(0.018)
1.4±0.1
(0.055±0.004)
(0.098±0.008)(0.079±0.008)(0.071±0.008)
Unit:mm(inch)
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to those products is reflow soldering only(. LB only)
・Recommended Land Patterns
C
Unit:mm
TYPE
LBM2016
LEM2520
A
B
C
0.7
0.9
0.8
1.5
1.8
1.5
A
B
A
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound03_e-01
54
■ PART NUMBERS
●LBM2016 TYPE
EHS(Environmental
Self-resonant
frequency
〔MHz〕min.
Resistance
DC
〔Ω(〕±30%)
Rated current
〔mA〕
(max.)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Q
Ordering code
Hazardous
(min.)
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
LB M2016TR12J
LB M2016TR15J
LB M2016TR18J
LB M2016TR22J
LB M2016TR27J
LB M2016TR33J
LB M2016TR39J
LB M2016TR47J
LB M2016TR56J
LB M2016TR68J
LB M2016TR82J
LB M2016T1R0J
LB M2016T1R2J
LB M2016T1R5J
LB M2016T1R8J
LB M2016T2R2J
LB M2016T2R7J
LB M2016T3R3J
LB M2016T3R9J
LB M2016T4R7J
LB M2016T5R6J
LB M2016T6R8J
LB M2016T8R2J
LB M2016T100J
LB M2016T120J
LB M2016T150J
LB M2016T180J
LB M2016T220J
LB M2016T270J
LB M2016T330J
LB M2016T390J
LB M2016T470J
LB M2016T560J
LB M2016T680J
LB M2016T820J
LB M2016T101J
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
600
550
500
450
425
400
375
350
300
270
250
220
180
135
100
75
0.13
0.15
0.15
0.20
0.21
0.21
0.26
0.26
0.29
0.32
0.34
0.38
0.41
0.47
0.48
0.54
0.59
0.68
0.74
0.78
0.88
0.97
1.10
1.20
1.4
610
570
560
520
510
490
440
430
410
400
390
385
370
350
345
340
310
290
275
270
255
240
225
215
200
190
150
140
130
125
120
115
95
25.2
30
55
7.96
48
±5%
43
40
36
33
30
27
12
23
25
15
20
1.5
18
18
2.5
22
17
2.8
27
16
3.2
2.52
33
15
3.6
39
14
3.9
47
13
4.1
56
20
15
12
5.9
68
11
7.0
90
82
10
7.7
85
100
9.0
8.0
80
0.796
●LEM2520 TYPE
EHS(Environmental
Self-resonant
frequency
〔MHz〕min.
Resistance
DC
〔Ω(〕±30%)
Rated current
〔mA〕
(max.)
Measuring
frequency
〔MHz〕
Inductance
〔μH〕
Inductance
Tolerance
Q
Ordering code
Hazardous
(min.)
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
LEM 2520 TR12K
LEM 2520 TR15K
LEM 2520 TR18K
LEM 2520 TR22K
LEM 2520 TR27K
LEM 2520 TR33K
LEM 2520 TR39K
LEM 2520 TR47K
LEM 2520 TR56K
LEM 2520 TR68K
LEM 2520 TR82K
LEM 2520 T1R0J
LEM 2520 T1R2J
LEM 2520 T1R5J
LEM 2520 T1R8J
LEM 2520 T2R2J
LEM 2520 T2R7J
LEM 2520 T3R3J
LEM 2520 T3R9J
LEM 2520 T4R7J
LEM 2520 T5R6J
LEM 2520 T6R8J
LEM 2520 T8R2J
LEM 2520 T100J
LEM 2520 T120J
LEM 2520 T150J
LEM 2520 T180J
LEM 2520 T220J
LEM 2520 T270J
LEM 2520 T330J
LEM 2520 T390J
LEM 2520 T470J
LEM 2520 T560J
LEM 2520 T680J
LEM 2520 T820J
LEM 2520 T101J
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
600
550
500
450
425
400
375
350
300
270
250
220
180
135
100
75
0.37
0.42
0.46
0.52
0.56
0.60
0.65
0.68
0.75
0.85
1.00
1.10
1.20
1.30
1.45
1.55
1.70
1.90
2.10
2.30
2.50
2.70
3.05
3.50
3.80
4.40
4.80
5.50
6.30
7.10
9.50
11.10
12.10
16.60
19.00
21.00
520
480
460
430
420
400
375
350
325
300
260
245
230
220
210
200
195
185
180
175
170
165
160
155
150
140
130
125
115
110
90
±10%
25.2
30
55
7.96
48
43
40
36
33
30
±5%
27
12
23
25
15
20
18
18
22
17
27
16
2.52
33
15
39
14
47
13
80
56
20
15
12
75
68
11
70
82
10
65
100
9
60
0.796
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound03_e-01
55
■ ELECTRICAL CHARACTERISTICS
●LBM2016
Q-vs-Frequency characteristics
Impedance-vs-Frequency characteristics
Inductance-vs-Frequency characteristics
■
■
■
100
1000
1000000
101J
1R0J
100J
100J
100000
101J
100
1R0J
101J
10000
100J
10
10
1000
100
10
1R0J
1
0
1
0
1
10
Frequency[MHz]
100
1
10
100
10
100
Freaquency[MHz]
Freaquency[MHz]
●LEM2520
Q-vs-Frequency characteristics
DC Bias characteristics
Temperature characteristics
■
■
■
+
Measured by HP4285A 42851A
Measured by HP4285A+42841A
Measured by HP4285A+42851A
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound03_e-01
56
■ PACKAGING
①Minimum Quantity
Type
④Leader and Blank Portion
Standard Quantity[pcs]
Papar Tape
Embossed Tape
LBC3225/CBC3225
LB3218
ー
ー
1000
2000
LBR2518/LBC2518/LB251
/CB2518/CBC2518/LEM2520
ー
ー
ー
2000
2000
3000
LBM2016/LBC2016/
LB2016/CB2016/CBC2016
LB2012/LBC2012/LBR202
/CB2012/CBC2012
CBL2012
4000
4000
ー
ー
ー
3000
⑤Reel Size
LB1608
LBMF1608/CBMF1608
2.5 max
(0.098)
②Tape material
◦Embossed tape
10.0±1.5
(0.394±0.059)
⑥Top Tape Strength
The top tape requires a peel-off force 0.1 to 0.7N in the direction of the arrow as
illustrated below.
Pull direction
③Taping Dimensions
◦Embossed Tape(0.315 inches wide)
◦Card board carrier tape(0.315 inches wide)
Chip cavity
Insertion pitch
Tape thickness
Type
A
B
F
T
K
1.75±0.1
2.1±0.1
4.0±0.1
0.3±0.05
1.9max.
LBM 2016
LEM 2520
(0.069±0.004)(0.083±0.004)(0.157±0.004)(0.012±0.002) (0.074)
2.3±0.1
2.7±0.1
4.0±0.1
0.3±0.05
2.1±0.1
(0.091±0.004)(0.106±0.004)(0.157±0.004)(0.012±0.002)(0.083±0.004)
LBC3225/
CBC3225
2.8±0.1
3.5±0.1
4.0±0.1
0.3±0.05
4.0max.
(0.110±0.004)(0.138±0.004)(0.157±0.004)(0.012±0.002) (0.157)
2.1±0.1
3.5±0.1
4.0±0.1
0.3±0.05
2.2max.
LB3218
(0.084±0.004)(0.014±0.004)(0.157±0.004)(0.012±0.002) (0.086)
LB2518 / CB2518
LBC2518 / CBC2518
LBR2518
2.15±0.1
2.7±0.1
4.0±0.1
0.3±0.05
2.2max.
(0.085±0.004)(0.107±0.004)(0.157±0.004)(0.012±0.002) (0.086)
LB2016/ CB2016
1.75±0.1
2.1±0.1
4.0±0.1
0.3±0.05
1.9max.
LBC2016 / CBC2016 (0.069±0.004)(0.083±0.004)(0.157±0.004)(0.012±0.002) (0.074)
LB2012 / CB2012
LBC2012 / CBC2012
LBR2012
1.45±0.1
2.25±0.1
4.0±0.1
0.25±0.05 1.45max.
(0.058±0.004) (0.09±0.004) (0.157±0.004)(0.010±0.002) (0.057)
1.55±0.1
2.3±0.1
4.0±0.1
1.1max.
1.1max.
(0.044)
1.1max.
(0.044)
CBL2012
LB1608
(0.061±0.004) (0.091±0.004) (0.157±0.004) (0.044)
1.0±0.1
1.8±0.1
4.0±0.1
1.1max.
(0.059±0.004) (0.072±0.004) (0.157±0.004) (0.044)
LBMF1608 /
CBMF1608
1.1±0.1
1.9±0.1
4.0±0.1
0.25±0.05
1.2max.
(0.04±0.004) (0.076±0.004) (0.157±0.004)(0.010±0.002) (0.047)
Unit:mm(inch)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP1
■ RELIABILITY DATA
1.Operating temperature Range
LEM2520
ー40~+85℃
LB3218
LB2518
LB2016
LB2012
LB1608
LB1608
LB1608
LBMF1608
LBMF1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
ー25~+105℃(Including self-generated heat)
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
2.Storage
LEM2520
LB3218
LB2518
LB2016
LB2012
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
ー40~+85℃
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
3.Rated Current
LEM2520
LB3218
LB2518
LB2016
LB2012
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
LBC2016
LBC2012
CB2012
Within the specified tolerance
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2518
CBC2016
CBC2012
【Test Methods and Remarks】
LEM Series
The maximum DC value having inductance decrease within 10% and temperature increase within 20℃ by the application of DC bias.
4.Inductance
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
Within the specified tolerance
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM Series R12~101
Measuring equipment:LCR Mete(r HP4285A+42851A or its equivalent)
Measuring frequency:Specified frequency
Measuring equipment:LCR Mate(r HP4285A or its equivalent)
LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF・LBM Series
5.Q
LEM2520
Within the specified tolerance
LBMF1608
LB3218
LB2518
LB2016
LB2012
LB1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
Within the specified tolerance
【Test Methods and Remarks】
LEM Series R12~101 Measuring equipment:LCR Meter(HP4285A+42851A or its equivalent)
Measuring frequency:Specified frequency
LBM Series
Measuring equipment:LCR Mate(r HP4285A or its equivalent)
6.DC Resisitance
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
LBC2016
LBC2012
CB2012
Within the specified tolerance
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2518
CBC2016
CBC2012
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF SeriesꢀMeasuring equipment:DC Ohmmete(r HIOKI 3227 or its equivalent)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP2
■ RELIABILITY DATA
7.Self-Resonant Frequency
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
Within the specified tolerance
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM2520
Measuring equipment:Impedance analyze(r HP4291A or its equivalent)
LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF Series Measuring equipment:Impedance analyzer(HP4291A or its equivalent)
LBM Series
Measuring equipment:Network analyze(r HP8720B or its equivalent)
8.Temperature Characteristic
LEM2520
Inductance change:Within±5%
Inductance change:Within±15%
LBMF1608・LB3218ꢀInductance change:Within±20%
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225・LBC2518・LBC2016 Inductance change:Within±20%
LBC3225
LBC2518
LBC2016
LBC2012
LBC2012
Inductance change:Within±30%
LBR2518
CB2518
LBR2012
CB2016
Inductance change:Within±15%
Inductance change:Within±15%
CB2012
CBC3225・CBC2518・CBC2016 Inductance change:Within±20%
CBC3225
CBC2518
CBC2016
CBC2012
CBC2012
Inductance change:Within±30%
CBL2012
CBMF1608
LBM2016
Inductance change:Within±15%
Inductance change:Within±20%
Inductance change:Within±5%
【Test Methods and Remarks】
Change of maximum inductance deviation in step 1-5ꢀ
Step
1
2
3
4
5
Temperture(℃)
20
ー25
20(Reference temperature) +85(Maximum operating temperature)
20
9.Rasistance to Flexure of Substrate
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
No damage.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
Pressing jig
Warp: 2mm(LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series)
3mm(LEM2520)
Test substrate: Printed board
According to JIS C0051
LB・LBMF・
CBMF1608
ꢀ:0.8mm
Others:1.0mm
Board
10.Body Strength
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
No damage.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LB・LBC・LBR・CB・CBC・CBL・LBM・LEM2520 Applied force:10N
Duration:10sec.
LB1608・LBMF1608・CBMF1608
Applied force:5N
Duration:10sec.
11.Self Resonant Freguency
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
Inductance change : Within-10%
Inductance change : Within-20%
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
Inductance change : Within-30%
Inductance change : Within-10%
【Test Methods and Remarks】
Measure inductance with application of rated current using LCR metre to compare it with the initial value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP3
■ RELIABILITY DATA
12.Adhesion of terminal electrode
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
No abnormality.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF・LEM2520ꢀApplied force:10N to X and Y directions
Duration:5 sec.
Test substrate:Printed board
LB1608・CBMF1608・LBMF1608
Applied force:5N to X and Y directions
Duration:5 sec.
Test substrate:Printed board
13.Resistance to vibration
LEM2520
Inductance change:Within±5%
No significant abnormality in appearance.
No significant abnormality in appearance.
No significant abnormality in appearance.
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
Inductance change:Within±10%
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
Inductance change:Within±5%
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF:According to JIS C5102 clause 8.2.
Vibration type:A
Directions:2 hrs each in X, Y and Z directions. Total:6 hrs
Frequency range:10 to 55 to 10 Hz(1min.)
Amplitude:1.5mm
Mounting method:Soldering onto printed board
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM:Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
14.Drop test
LEM2520
LB3218
Inductance change:Within±5%
No significant abnormality in appearance.
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM:
Acceleration:980m/sec2
Duration:6msec
Number of times:6 sides×3 times
Mounting method:Soldering onto printed board
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM:Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
15.Solderability
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
At least 90% of surface of terminal electrode is covered by new
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM:
Solder temperature:230±5℃
Duration:5±0.5sec.
Flux:Methanol solution with 25% of colophony
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF: Solder temperature:245±5℃
Duration:5±0.5sec
Flux:Methanol solution with 25% of colophony
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP4
■ RELIABILITY DATA
16.Resisitance to soldering heat
LEM2520
No significant abnormality in appearance.
LB3218,LB2518,LB2016,LB2012,LB1608
Inductance change:Within±10% No significant abnormality in appearance.
LBMF1608
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
Inductance change:Within±20% No significant abnormality in appearance.
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
LBC2016
LBC2012
CB2012
Inductance change:Within±10% No significant abnormality in appearance.
Inductance change:Within±20% No significant abnormality in appearance.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2518
CBC2016
CBC2012
Inductance change:Within±5%
No significant abnormality in appearance.
【Test Methods and Remarks】
LEM:
Reflow condition 3 times of reflow over at 220±5℃ for 40sec. MAX, With Peak temperature at 240±5℃ for 5 sec.
MAX.(Refer to a Profile of chart below.)
Flow condition
Solder temperature:260±5℃
Duration:10±1sec. Once
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF:
3 times of reflow oven at 230℃ MIN for 40sec. with peak temperature at 260 ℃ for 5sec.
17.Resisitance to solvent
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
No significant abnormality in appearance
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
Solvent temperature:Room temperature
Type of solvent:Isopropyl alcohol
ꢀ(LEM2520・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF)
Cleaning conditions:90s. Immersion and cleaning.
ꢀ(LEM2520・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF)
18.Thermal shock
LEM2520
Inductance change :Within±10%
Q→ R12~4R7:30 min.
5R6~330:25 min.
390~820:20 min.
101:15 min.
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
Inductance change:Within±10%
No significant abnormality in appearance.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM : Conditions for 1cycle
Step
Temperature(℃) Duration(min)
1
2
ー40
+85
30
30
Number of cycle:100 cycle
Recovery:At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF: ー40~+85℃, maintain times 30min. ,100 cycle
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
19.Damp heat
LEM2520
Inductance change :Within±10%
Q→ R12~4R7:30 min.
5R6~330:25 min.
390~820:20 min.
101:15 min.
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
Inductance change:Within±10%
No significant abnormality in appearance.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
Temperature:60±2℃
Humidity:90~95%RH
Duration:1000 hrs
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM:Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP5
■ RELIABILITY DATA
20.Loading under damp heat
Inductance change :Within±10%
Q→ R12~4R7:30 min.
5R6~330:25 min.
LEM2520
390~820:20 min.
101:15 min.
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
Inductance change:Within±10%
No significant abnormality in appearance.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF:Temperature:60±2℃
Humidity:90~95%RH
Duration:1000 hrs
Applied current:Rated current
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM:Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
21.High temperature life test
LEM2520
Inductance change :Within±10%
Q→ R12~4R7:30 min.
5R6~330:25 min.
390~820:20 min.
101:15 min.
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
Inductance change:Within±10%
No significant abnormality in appearance.
【Test Methods and Remarks】
LEM・CB・CBC・CBL・LBM・CBMF:Temperature:85±2℃
Duration:1000 hrs
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM:Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
22.Loading at high temperature
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
Inductance change:Within±10%
No significant abnormality in appearance.
CB2012
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LB・LBC・LBR・LBMF:Temperature:85±2℃
Duration:1000 hrs
Applied current:Rated current
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP6
■ RELIABILITY DATA
23.Low temperature life test
Inductance change :Within±10%
Q→ R12~4R7:30 min.
5R6~330:25 min.
LEM2520
390~820:20 min.
101:15 min.
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
Inductance change:Within±10%
No significant abnormality in appearance.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF
Temperature:-40±2℃
Duration:1000 hrs
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM:Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
24.Standard condition
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
Standard test conditions
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
Unless specified, Ambient temperature is 20±15℃ and the Relative humidity is 65±
20%. If there is any doubt about the test results, further measurement shall be had
within the following limits:
CB2012
Ambient Temperature: 20±2℃
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
Relative humidity: 65±5%
Inductance value is based on our standard measurement systems.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP7
■ PRECAUTIONS
LEM Type,LB Type,CB Type
1.Circuit Design
◆Operating environment
1.The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,
Precautions
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product
failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2.PCB Design
◆Land pattern design
Precautions
1.Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications.
PRECAUTIONS
【Recommended Land Patterns】
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to those products is reflow soldering only.
・Recommended Land Patterns
Unit : mm
TYPE
1608
A
B
C
1.0
0.9
1.45
1.8
2.0
1.5
2.0
2.7
0.55
0.55
0.7
0.7
0.8
0.9
1.0
1.0
0.7
0.8
0.8
0.8
1.2
1.5
1.6
1.6
MF1608
2012
Technical
consider-
ations
2016
2518
C
LEM2520
3218
3225
A
B
A
3.Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
consider- 1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
ations
4.Soldering
◆Wave soldering(LEM Type only)
1.For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant specifications.
◆Reflow soldering(LB and CB Types)
1.For reflow soldering with either leaded or lead-free solder,the profile specified in "point for controlling" is recommended.
Precautions ◆Reflow soldering(LEM)
1.For reflow soldering, please apply conditions meeting the range of the specified conditions in our catalog or the relevant specifications.
◆Recommended conditions for using a soldering iron
1.Put the soldering iron on the land-pattern. Soldering iron's temperature-Below 350℃ Duration-3 secons or less. The soldering iron shoud not come in contact
with inductor directly.
◆Wave soldering(LEM Type only)
1.Components can be damaged by excessive heat where soldering conditions exceed the specified range.
◆Reflow soldering(LB and CB Types)
1.Reflow profile
300
(LB・CB Type)
Peak Temp: 260+0/ー5℃
250
200
150
100
50
5 sec Max
Technical
consider-
ations
230℃ Minn
Pre-heat zone
180℃
150℃
30±10 sec
90±30 sec
0
◆Recommended conditions for using a soldering iron
1.Components can be damaged by excessive heat where soldering conditions exceed the specified range.
5.Cleaning
◆Cleaning conditions
1.LEM Type, LB Type, CB Type
Washing by supersonic waves shall be avoided.
Precautions
Technical ◆Cleaning conditions
consider-
ations
1.LEM Type, LB Type, CB Type
If washing by supersonic waves, supersonic waves may cause broken products.
6.Handling
◆Handling
1.Keep the inductors away from all magnets and magnetic objects.
◆Breakaway PC boards(splitting along perforations)
Precautions
1.When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the board.
2.Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1.Please do not give the inductors any excessive mechanical shocks.
◆Handling
1.There is a case that a characteristic varies with magnetic influence.
◆Breakaway PC boards(splitting along perforations)
1.Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
Technical
consider-
ations
1.There is a case to be damaged by a mechanical shock.
7.Storage conditions
◆Storage
1.To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled.
ꢀ・Recommended conditions
ꢀꢀAmbient temperature:0~40℃ꢀ/ꢀHumidity:Below 70% RH
Precautions
The ambient temperature must be kept below 30℃ Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For
this reason, LE type inductors should be used within one year from the time of delivery.
LB type:Should be used within 6 months from the time of delivery.
LE type:In case of storage over 6 months, solderability shall be checked before actual usage.
Technical ◆Storage
consider-
ations
1.Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP8
SMD INDUCTORS LOW PROFILE TYPE
REFLOW
■ FEATURES
■ APPLICATIONS
◦Small and Low profile inductor.
◦For small DC/DC converter
(cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).
◦It corresponds to High current.
◦Simple and original magnetic shield structure.
◦Durable structure against dropping impact.
■ ORDERING CODE
N R △ 4 0 1 8 T △ 1 0 0 M △
❶
❷
❸
❹
❺
❻
❶Type
Coating resin specification
❸Packaging
Tape & Reel
❹Nominal inductance
〔μH〕
example
❺Inductance tolerance
❻Internal code
Standard product
NR△, NRG
T△
M
±20%
±30%
△
△=Blank Space
△=Blank Space
△=Blank Space
N
2R2
100
101
2.2
10
❷External dimensions (W×L×H)
example
3010
3012
3015
4010
4012
4018
4026
5040
6012
6020
6028
6045
8040
4.0×4.0×2.6mm
100
3.0×3.0×1.0mm
3.0×3.0×1.2mm
3.0×3.0×1.5mm
4.0×4.0×1.0mm
4.0×4.0×1.2mm
4.0×4.0×1.8mm
5.0×5.0×4.0mm
6.0×6.0×1.2mm
6.0×6.0×2.0mm
6.0×6.0×2.8mm
6.0×6.0×4.5mm
8.0×8.0×4.0mm
※R=decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
ℓ
H
L
H
L
e
W
W
f
e
Standard
Standard
Quantity [pcs]
Quantity [pcs]
Tape & Reel
Type
L
W
H
e
f
Type
L
W
H
e
Δe
f
Δℓ
Tape & Reel
*3)4.1max
(0.161max)
1.0 max
(0.039 max)
NR3010
NR3012
NR3015
NR4010
NR4012
NR4018
NRG4026
2000
4.9±0.2
4.9±0.2
ꢀ
1.2±0.2
0.3±0.2
3.3±0.2
1.3±0.3
NR5040
1500
(0.193±0.008) (0.193±0.008) *4)4.0max
(0.047±0.008) (0.011±0.008) (0.130±0.008) (0.051±0.011)
1.2 max
(0.047 max)
3.0±0.1
(0.118±0.004) (0.118±0.004)
3.0±0.1
0.9±0.2
(0.035±0.008)(0.075±0.008)
1.9±0.2
2000
2000
5000
4500
3500
2000
ꢀ
(0.157max)
NR6012
6.0±0.2
6.0±0.2
1.2 max
1.35±0.2
0.3±0.2
4.0±0.2
1.5 max
(0.059 max)
1000
2500
2000
(E Type) (0.236±0.008) (0.236±0.008) (0.047 max) (0.053±0.008) (0.011±0.008) (0.157±0.008)
6.0±0.2
6.0±0.2
2.0 max
1.35±0.2
0.3±0.2
4.0±0.2
1.0 max
(0.039 max)
NR6020
NR6028
NR6045
(0.236±0.008) (0.236±0.008) (0.078 max) (0.053±0.008) (0.011±0.008) (0.157±0.008)
2.3±0.3
1.2 max
(0.047 max)
(0.091±0.011)
6.0±0.2
6.0±0.2
2.8 max
1.35±0.2
0.3±0.2
4.0±0.2
4.0±0.2
(0.157±
0.008)
4.0±0.2
(0.157±
0.008)
1.1±0.2
(0.043±0.008)(0.098±0.008)
2.5±0.2
(0.236±0.008) (0.236±0.008) (0.110 max) (0.053±0.008) (0.011±0.008) (0.157±0.008)
1.8 max
(0.071 max)
6.0±0.2
6.0±0.2
4.5 max
1.35±0.2
0.3±0.2
4.0±0.2
1500
(0.236±0.008) (0.236±0.008) (0.177 max) (0.053±0.008) (0.011±0.008) (0.157±0.008)
2.6 max
(0.102 max)
1)4.2max
*3)1R5~100 Type
*4)150~470 Type
Unit
:
mm (inch)
*
(0.165max)
8.0±0.2
8.0±0.2
1.6±0.3
5.6±0.3
NR8040
1000
*
2)4.0max
(0.157max)
(0.315±0.008)(0.315±0.008)
(0.063±0.012)(0.220±0.012)
*1)0R9~6R8 Type
*2)100~101 Type
Unit
:
mm (inch)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
122
Recommended Land Patterns
【NR3010, NR3012, NR3015】
【NR4010, NR4012, NR4018, NRG4026】
【NR5040】
【NR6012,NR6020,NR6028,NR6045】
【NR8040】
2.2
2.8
3.6
4.7
5.6
2.7
3.7
4.0
5.7
7.5
0.8
0.8
1.2
1.2
1.5
1.5
1.6
1.6
1.8
1.8
Unit : mm
■ AVAILABLE INDUCTANCE RANGE
Type
NR 3010
NR 3012
NR 3015
NR 4010
NR 4012
NR 4018
NR 5040
NR 6012
NR 6020
NR 6028
NR 6045
NR 8040 NRG 4026
Range
IMAX
[mA]
Rdc±20% IMAX
Rdc±20% IMAX
Rdc±20% IMAX
Rdc±20% IMAX
Rdc±20% IMAX
Rdc±20% IMAX
Rdc±30% IMAX
[Ω] [mA]
Rdc±20% IMAX
[Ω] [mA]
3800
Rdc±20% IMAX
[Ω] [mA]
Rdc±30% IMAX
Rdc±30% IMAX
[Ω] [mA]
Rdc±30% IMAX
[Ω] [mA]
Rdc±30%
[Ω] [mA]
[Ω] [mA]
[Ω] [mA]
[Ω] [mA]
[Ω] [mA]
[Ω] [mA]
[Ω] [mA]
[Ω]
0.020
0.8
1.0
3.3
4600
0.013 4200
0.014 7800
0.006
1300
0.065 1490
0.05 2100
0.030 1050
0.100 1500
0.060 1830
0.030
3600
2300
0.030
0.085
0.020
1730
0.095
500
220
0.450 540
2.05 250
0.290 700
1.45 300
0.230 560
1.34 240
0.380 740
1.81 350
0.240 840
1.00
0.180 2100
900
0.056 1000
0.310
0.235 1400
0.125 1900
0.290
0.065 2500
0.600 700
0.047 3100
0.034 1300
10
47
950
2.18
650
0.300
100
220
320
620
0.500 1000
0.290
170
4.00
■ PART NUMBERS
●NR 3010 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±20%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
1,300
1,200
1,100
870
Idc2
1,400
1,300
1,100
940
NR 3010T 1R0N
NR 3010T 1R5N
NR 3010T 2R2M
NR 3010T 3R3M
NR 3010T 4R7M
NR 3010T 6R8M
NR 3010T 100M
NR 3010T 150M
NR 3010T 220M
NR 3010T 330M
NR 3010T 470M
1.0
1.5
2.2
3.3
4.7
6.8
10
126
98
82
63
56
46
35
30
25
20
17
0.065
0.080
0.095
0.140
0.190
0.300
0.450
0.740
1.03
±30%
750
780
610
630
100
±20%
500
510
15
400
400
22
350
350
33
1.55
260
275
47
2.05
220
235
●NR 3012 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±20%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
1,500
1,360
1,100
910
Idc2
1,490
1,400
1,200
1,050
980
NR 3012T 1R0N
NR 3012T 1R5N
NR 3012T 2R2M
NR 3012T 3R3M
NR 3012T 4R7M
NR 3012T 6R8M
NR 3012T 100M
NR 3012T 150M
NR 3012T 220M
NR 3012T 330M
NR 3012T 470M
1.0
1.5
2.2
3.3
4.7
6.8
10
110
92
70
55
48
40
32
27
22
19
17
0.050
0.060
0.080
0.100
0.130
0.190
0.290
0.450
0.630
1.03
±30%
770
670
740
100
±20%
540
630
15
440
485
22
375
420
33
310
330
47
1.45
250
280
●NR 3015 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±20%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
2,100
1,800
1,480
1,210
1,020
870
Idc2
2,100
1,820
1,500
1,230
1,040
880
NR 3015T 1R0N
NR 3015T 1R5N
NR 3015T 2R2M
NR 3015T 3R3M
NR 3015T 4R7M
NR 3015T 6R8M
NR 3015T 100M
NR 3015T 150M
NR 3015T 220M
NR 3015T 330M
NR 3015T 470M
1.0
1.5
2.2
3.3
4.7
6.8
10
100
87
64
49
40
36
28
23
20
18
17
0.030
0.040
0.060
0.080
0.120
0.160
0.230
0.360
0.520
0.840
1.34
±30%
100
±20%
700
710
15
560
560
22
470
470
33
390
370
47
320
300
※)The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※)The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※)The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
123
■ PART NUMBERS
●NR 4010 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±20%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
1,800
1,150
1,100
900
Idc2
1,050
890
820
750
620
600
510
NR 4010T 1R0N
NR 4010T 2R2N
NR 4010T 3R3M
NR 4010T 4R7M
NR 4010T 6R8M
NR 4010T 100M
NR 4010T 150M
NR 4010T 220M
NR 4010T 330M
NR 4010T 470M
1.0
2.2
3.3
4.7
6.8
10
116
73
58
47
38
31
24
19
15
13
0.100
0.150
0.180
0.210
0.300
0.380
0.510
0.870
1.54
±30%
740
100
560
±20%
15
470
22
360
400
300
280
33
280
47
1.81
240
●NR 4012 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±20%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
2,500
1,650
1,200
1,050
900
Idc2
1,500
1,200
980
NR 4012T 1R0N
NR 4012T 2R2M
NR 4012T 3R3M
NR 4012T 4R7M
NR 4012T 6R8M
NR 4012T 100M
NR 4012T 150M
NR 4012T 220M
NR 4012T 330M
NR 4012T 470M
1.0
2.2
3.3
4.7
6.8
10
±30%
131
66
50
45
35
28
23
18
15
12
0.060
0.090
0.130
0.140
0.180
0.240
0.400
0.480
0.810
1.00
960
840
100
±20%
740
770
15
560
600
540
22
510
33
400
420
47
350
370
●NR 4018 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±20%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
4,000
2,700
2,000
1,700
1,450
1,200
940
Idc2
1,830
1,440
1,230
1,200
1,060
840
NR 4018T 1R0N
NR 4018T 2R2M
NR 4018T 3R3M
NR 4018T 4R7M
NR 4018T 6R8M
NR 4018T 100M
NR 4018T 150M
NR 4018T 220M
NR 4018T 330M
NR 4018T 470M
NR 4018T 680M
NR 4018T 101M
NR 4018T 151M
NR 4018T 221M
1.0
2.2
3.3
4.7
6.8
10
±30%
80
52
44
34
29
24
0.030
0.060
0.070
0.090
0.110
0.180
0.250
0.360
0.530
0.650
1.00
15
19
650
100
22
±20%
16
800
590
33
12
650
490
47
10
570
420
68
8.3
6.5
5.5
4.0
470
320
100
150
220
1.50
400
270
2.50
310
220
4.00
270
170
●NR 5040 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±30%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
Idc2
3,600
3,500
3,300
3,100
2,300
2,100
1,800
1,400
1,200
900
NR 5040T 1R5N
NR 5040T 2R2N
NR 5040T 3R3N
NR 5040T 4R7N
NR 5040T 6R8M
NR 5040T 100M
NR 5040T 150M
NR 5040T 220M
NR 5040T 330M
NR 5040T 470M
1.5
2.2
3.3
4.7
6.8
10
60
42
32
28
21
18
13
9
0.020
0.022
0.027
0.029
0.049
0.056
0.080
0.126
0.180
0.310
6,000
4,600
3,800
3,300
2,600
2,300
2,000
1,600
1,300
1,100
±30%
100
15
±20%
22
33
7
47
6
●NR 6012 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±20%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
2,100
1,800
1,500
1,300
1,000
800
Idc2
1,730
1,570
1,400
1,180
1,000
790
NR 6012T 2R5NE
NR 6012T 4R0NE
NR 6012T 5R3ME
NR 6012T 6R8ME
NR 6012T 100ME
NR 6012T 150ME
NR 6012T 220ME
NR 6012T 330ME
NR 6012T 470ME
NR 6012T 680ME
NR 6012T 101ME
2.5
4.0
5.3
6.8
10
45
39
34
30
22
18
12
8
0.090
0.105
0.125
0.165
0.235
0.330
0.530
0.700
1.05
±30%
15
100
22
±20%
760
630
33
590
530
47
6
520
460
68
3
1.35
440
410
100
1
2.18
350
320
※)The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※)The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※)The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
124
■ PART NUMBERS
●NR 6020 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±20%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
Idc2
3,800
3,200
2,700
2,600
2,000
1,800
1,400
950
NR 6020T 0R8N
NR 6020T 1R5N
NR 6020T 2R2N
NR 6020T 3R3N
NR 6020T 4R7N
NR 6020T 6R8N
NR 6020T 100M
NR 6020T 220M
0.8
1.5
2.2
3.3
4.7
6.8
10
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
5,500
4,000
3,200
2,800
2,400
2,000
1,700
1,050
±30%
100
±20%
22
●NR 6028 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±30%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
6,600
5,000
4,200
3,600
2,700
2,500
1,900
1,600
1,300
1,100
950
Idc2
4,600
4,200
3,700
3,400
3,000
2,500
1,900
1,800
1,400
1,100
920
NR 6028T 0R9N
NR 6028T 1R5N
NR 6028T 2R2N
NR 6028T 3R0N
NR 6028T 4R7M
NR 6028T 6R0M
NR 6028T 100M
NR 6028T 150M
NR 6028T 220M
NR 6028T 330M
NR 6028T 470M
NR 6028T 680M
NR 6028T 101M
0.9
1.5
2.2
3.0
4.7
6.0
10
90
78
68
55
39
30
20
17
12
10
8
0.013
0.016
0.020
0.023
0.031
0.040
0.065
0.095
0.135
0.220
0.300
0.420
0.600
±30%
100
15
22
±20%
33
47
68
5
760
770
100
3
620
660
●NR 6045 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±30%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
8,500
8,000
7,000
6,000
5,000
4,000
3,800
3,000
2,300
1,900
1,500
1,300
1,000
800
Idc2
4,200
4,000
3,700
3,500
3,200
3,000
2,800
2,500
1,900
1,500
1,400
1,100
900
NR 6045T 1R0N
NR 6045T 1R3N
NR 6045T 1R8N
NR 6045T 2R3N
NR 6045T 3R0N
NR 6045T 4R5M
NR 6045T 6R3M
NR 6045T 100M
NR 6045T 150M
NR 6045T 220M
NR 6045T 330M
NR 6045T 470M
NR 6045T 680M
NR 6045T 101M
1.0
1.3
1.8
2.3
3.0
4.5
6.3
10
110
95
80
60
45
25
15
12
10
7
0.014
0.016
0.018
0.021
0.024
0.031
0.038
0.047
0.077
0.115
0.145
0.220
0.330
0.500
±30%
100
15
22
±20%
33
6
47
5
68
4
100
3
700
●NR 8040 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance Inductance
DC Resistance
[Ω] (±30%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
11,000
9,000
7,400
5,300
4,700
4,000
3,400
2,700
2,200
1,900
1,500
1,200
1,000
Idc2
7,800
7,000
6,300
4,900
4,100
3,700
3,100
2,400
2,200
1,700
1,400
1,100
1,000
NR 8040T 0R9N
NR 8040T 1R4N
NR 8040T 2R0N
NR 8040T 3R6N
NR 8040T 4R7N
NR 8040T 6R8N
NR 8040T 100M
NR 8040T 150M
NR 8040T 220M
NR 8040T 330M
NR 8040T 470M
NR 8040T 680M
NR 8040T 101M
0.9
1.4
2.0
3.6
4.7
6.8
10
85
63
50
34
30
24
22
16
13
12
8
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.150
0.230
0.290
±30%
100
15
22
33
±20%
47
68
7
100
6
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
125
■ PART NUMBERS
●NRG 4026 Shielded type
Rated current ※)〔mA〕
Saturation current Temperature rise current
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±30%)
Ordering code
Idc1
3,100
2,100
1,800
1,450
1,300
1,000
900
Idc2
2,300
1,970
1,700
1,600
1,500
1,300
1,100
900
NRG4026 T 1R2N
NRG4026 T 2R3N
NRG4026 T 3R5M
NRG4026 T 4R7M
NRG4026 T 6R6M
NRG4026 T 100M
NRG4026 T 150M
NRG4026 T 220M
NRG4026 T 330M
NRG4026 T 470M
1.2
2.3
3.5
4.7
6.6
10
120
96
58
46
33
26
19
13
9
0.030
0.040
0.050
0.055
0.065
0.085
0.110
0.165
0.200
0.300
±30%
100
±20%
15
22
610
33
540
800
47
6
410
650
※)The saturation current (Idc1) is DC current value Inductance decrease down to 30%. (at 20℃)
※)The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※)The rated current is Idc2.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
126
■ ELECTRICAL CHARACTERISTICS
DC Bias characteristics
■
(Measured by HP4285A)
NR 3010
NR 3012
NR 3015
NR 4010
100
10
1
100
10
1
100
100
470M
220M
470M
470M
220M
100M
470M
220M
100M
220M
100M
10
10
100M
4R7M
4R7M
2R2M
4R7M
2R2M
4R7M
2R2N
2R2M
1
10
1
10
10
100
1,000
10,000
10
100
1,000
10,000
100
1,000
10,000
100
1,000
10,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
NR 4012
NR 4018
NR 6012(E Type)
NR 5040
100
1000
100
10
1000
100
470M
220M
470M
221M
100
101M
101M
470M
220M
220M
100M
470M
220M
10
10
100M
10
100M
5R3M
100M
4R7M
4R7N
2R2N
4R7M
2R2M
2R2M
1
10
1
1
1
10
100
1,000
10,000
10
100
1,000
10,000
10,000
10,000
10
100
1,000
10,000
100
1,000
10,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
NR 6045
NR 8040
NR 6020
NR 6028
100
10
1000
100
10
1000
100
10
1000
100
10
220M
100M
101M
470M
220M
101M
101M
470M
220M
470M
220M
100M
4R7M
2R2M
100M
4R5N
100M
4R7N
4R7
1
2R3N
1R0N
2R0N
0R9N
2R2
0R9
0R8N
1
1
1
0.1
0.1
0.1
10
0.1
10
10
100
1,000
10,000
10
100
1,000
100
1,000
10,000
100,000
100
1,000
10,000
100,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
NRG 4026
100
470M
220M
100M
10
4R7M
2R3N
1
10
100
1,000
DC Bia〔s mA〕
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound04_e-01
127
SMD INDUCTORS SMALL AND LARGE CURRENT TYPE
REFLOW
■ FEATURES
■ APPLICATIONS
◦Small and Low profile inductor.
◦For small DC/DC converter
(cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).
◦It corresponds to High current.
◦Simple and original magnetic shield structure.
◦Durable structure against dropping impact.
■ ORDERING CODE
N R H 2 4 1 0 T △ 1 0 0 M ○ ○ ○
❶
❷
❸
❹
❺
❻
❶Type
❷External dimensions
(W×L×H)
example
❸Packaging
Tape & Reel
❹Nominal inductance
〔μH〕
example
❺Inductance tolerance
❻Internal code
○○○ Standard products
○=Blank Space
NRH
T△
M
±20%
±30%
NRS Coating resin specification
NRV
△=Blank Space
N
2410
3010
3012
5012
5014
5020
6010
2.4×2.4×1.0mm
3.0×3.0×1.0mm
3.0×3.0×1.2mm
5.0×5.0×1.2mm
5.0×5.0×1.4mm
5.0×5.0×2.0mm
6.0×6.0×1.0mm
2R2
100
101
2.2
10
100
※R=decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Δℓ
H
L
H
L
Δe
e
e
e
W
f
f
W
e
Δe
Standard
Quantity [pcs]
Tape & Reel
Standard
Quantity [pcs]
Tape & Reel
Type
L
W
H
e
f
Type
L
W
H
e
Δe
f
Δℓ
2.4±0.1
2.4±0.1
1.0 max
0.6±0.2
1.45±0.2
1.2 max
NRH2410
NRH3010
2500
2000
NRS5012
NRS5014
NRS5020
NRS6010
1000
1000
800
(0.047 max)
(0.095±0.004)(0.095±0.004)(0.039 max)(0.024±0.008)(0.057±0.008)
4.9±0.2
4.9±0.2
1.4 max
1.2±0.2
0.3±0.2
3.3±0.2
1.3±0.3
1.0 max
(0.039 max)
(0.193±0.008) (0.193±0.008) (0.055 max) (0.047±0.008) (0.011±0.008) (0.130±0.008) (0.051±0.011)
3.0±0.1
3.0±0.1
0.9±0.2
1.9±0.2
2.0 max
(0.079 max)
1.0 max
(0.118±0.004)(0.118±0.004)
(0.035±0.008)(0.075±0.008)
NRH3012
NRV3012
1.2 max
(0.047 max)
2000
6.0±0.2
6.0±0.2
1.35±0.2
0.3±0.2
4.0±0.2
2.3±0.3
Unit:mm(inch)
1000
(0.236±0.008)(0.236±0.008) (0.039 max) (0.053±0.008) (0.011±0.008) (0.157±0.008) (0.091±0.011)
Recommended Land Patterns
Unit:mm(inch)
【NRH2410】
【NR3010, NRH3012, NRV3012】
【NRS5012, NRS5014, NRS5020】
【NRS6010】
1.45
2.2
3.6
4.7
2.0
2.7
4.0
5.7
0.7
0.7
0.8
0.8
1.5
1.5
1.6
1.6
■ AVAILABLE INDUCTANCE RANGE
Type
NRH2410
NRH3010
NRH3012
NRV3012
NRS5012
NRS5014
NRS5020
NRS6010
Range
Imax
[mA]
Rdc±20% Imax
Rdc±20% Imax
Rdc±20% Imax
[Ω][mA]
Rdc±20% Imax
Rdc±20% Imax
[Ω][mA]
Rdc±20% Imax
Rdc±20% Imax
Rdc±20%
[Ω][mA]
[Ω][mA]
[Ω][mA]
[Ω][mA]
[Ω][mA]
[Ω]
1.0
2.2
4.7
1410
0.070 1480
0.065 1710
0.048
2300
0.053
2800
3600
0.021
1900
0.045
0.090
0.270
1100
0.120
850
1800
0.100
1300
450
300
0.690 600
1.47 380
0.350 720
0.770
0.270
0.420
0.120 1000
0.260
10
22
900
500
0.630
100
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
128
■ PART NUMBERS
●NRH 2410 Shielded type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRH2410T R68NN 4
NRH2410T 1R0NN 4
NRH2410T 1R5MN
NRH2410T 2R2MN
NRH2410T 3R3MN
NRH2410T 4R7MN
NRH2410T 6R8MN
NRH2410T 100MN
NRH2410T 150MN
NRH2410T 220MN
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
120
106
94
77
56
50
43
32
27
0.060
0.070
0.110
0.150
0.220
0.290
0.410
0.690
1.02
2,200
1,800
1,550
1,290
1,000
880
1,570
1,410
1,160
970
±30%
770
100
670
±20%
750
570
550
450
15
470
370
22
22
1.47
390
300
●NRH 3010 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRH3010T 1R2N
NRH3010T 1R5N
NRH3010T 2R2M
NRH3010T 3R3M
NRH3010T 4R7M
NRH3010T 6R8M
NRH3010T 100M
NRH3010T 150M
NRH3010T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
1.5
2.2
3.3
4.7
6.8
10
120
99
86
64
50
44
34
25
22
0.065
0.075
0.083
0.130
0.170
0.250
0.350
0.550
0.770
1,700
1,440
1,300
1,000
850
1,480
1,370
1,300
1,030
900
±30%
100
±20%
700
745
600
620
15
450
480
22
380
410
●NRH 3012 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRH3012T 1R0N
NRH3012T 1R5N
NRH3012T 2R2M
NRH3012T 3R3M
NRH3012T 4R7M
NRH3012T 6R8M
NRH3012T 100M
NRH3012T 150M
NRH3012T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
111
95
78
61
50
43
32
26
22
0.048
0.055
0.075
0.100
0.130
0.190
0.270
0.450
0.630
2,200
1,700
1,500
1,200
1,000
850
1,710
1,600
1,370
1,210
1,060
890
±30%
100
±20%
730
720
15
530
570
22
500
500
●NRV 3012 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRV3012T 2R2M
RoHS
2.2
±20%
70
0.120
1,800
1,100
100
●NRS 5012 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRS5012T 1R0N
NRS5012T 1R5N
NRS5012T 2R2M
NRS5012T 3R3M
NRS5012T 4R7M
NRS5012T 6R8M
NRS5012T 100M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
100
86
70
48
40
36
26
0.053
0.070
0.085
0.160
0.180
0.260
0.420
4,500
3,800
3,100
2,400
2,200
1,700
1,400
2,300
2,200
2,000
1,450
1,400
1,100
850
±30%
±20%
100
●NRS 5014 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRS5014T 1R2N
NRS5014T 2R2N
NRS5014T 3R3N
NRS5014T 4R7N
RoHS
RoHS
RoHS
RoHS
1.2
2.2
3.3
4.7
86
56
48
41
0.045
0.065
0.080
0.100
3,800
2,800
2,350
2,050
2,800
2,300
2,100
1,800
±30%
100
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
129
■ PART NUMBERS
●NRS 5020 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRS5020T 1R0N
NRS5020T 1R5N
NRS5020T 2R2N
NRS5020T 3R3N
NRS5020T 4R7M
NRS5020T 6R8M
NRS5020T 100M
NRS5020T 150M
NRS5020T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
81
68
57
46
37
30
24
20
17
0.021
0.026
0.035
0.048
0.060
0.090
0.120
0.165
0.260
4,000
3,350
2,900
2,400
2,000
1,600
1,300
1,100
900
3,600
3,200
2,900
2,400
2,000
1,650
1,450
1,200
1,000
±30%
±20%
100
15
22
●NRS 6010 Type
Rated current ※)〔mA〕
EHS (Environmental
Hazardous
Self-resonant
frequency
〔MHz〕(min.)
Measuring
frequency
〔kHz〕
Inductance
[μH]
Inductance
Tolerance
DC Resistance
[Ω] (±20%)
Saturation
current
Idc1
Temperature rise
current
Ordering code
Substances
)
Idc2
NRS6010T 1R5N
NRS6010T 2R2N
NRS6010T 3R3N
NRS6010T 4R7N
NRS6010T 6R8N
NRS6010T 100M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
90
65
50
38
30
25
0.090
0.110
0.135
0.165
0.220
0.270
2,400
1,900
1,600
1,300
1,200
1,000
1,900
1,700
1,500
1,400
1,200
1,100
±30%
±20%
100
※)The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※)The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※)The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
130
■ ELECTRICAL CHARACTERISTICS
DC Bias characteristics
■
(Measured by HP4285A)
NRH 3010
NRH 3012
NRV 3012
100
100
100
220M
220M
10
10
10
100M
4R7M
100M
4R7M
2R2M
2R2M
1R0N
2R2M
1
1
1
0.1
0.1
0.1
10
100
1,000
10,000
10
100
1,000
10,000
10
100
1,000
10,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
NRS 5012
NRS 5014
NRS 5020
NRS 6010
100
100
100
100
200M
100M
4R7M
10
10
10
10
100M
100M
4R7M
4R7M
2R2M
4R7M
1R2N
2R2N
1R0N
2R2N
1
1
1
1
1R0N
0.1
0.1
0.1
0.1
10
100
1,000
10,000
10
100
1,000
10,000
10
100
1,000
10,000
10
100
1,000
10,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound05_e-01
131
■ PACKAGING
①Minimum Quantity
Type
Chip cavity
Insertion pitch
F
Tape thickness
Type
A
B
T
K
Standard Quantity [pcs]
Tape & Reel
2500
2000
2000
2000
5000
4500
3500
2000
1000
1000
800
1.4±0.1
(0.055±0.004)
NR 4010
NR 4012
NR 4018
NRG 4026
NRH 2410
NR 3010/NRH 3010
NR 3012/NRH3012/NRV3012
NR 3015
1.6±0.1
(0.063±0.004)
4.3±0.1
4.3±0.1
(0.169±0.004)(0.169±0.004)
2.1±0.1
(0.083±0.004)
NR 4010
0.3±0.05
3.1±0.1
NR 4012
(0.012±0.002)
(0.122±0.004)
NR 4018
1.4±0.1
(0.055±0.004)
1.6±0.1
(0.063±0.004)
2.3±0.1
(0.091±0.004)
4.2±0.1
(0.165±0.004)
NRG4026
NRS5012
NRS 5012
NRS 5014
NRS 5020
NR 5040
NRS 6010
5.25±0.1
5.25±0.1
NRS5014
(0.207±0.004)(0.207±0.004)
NRS5020
8.0±0.1
(0.315±0.004)
NR 5040
1500
1000
1000
2500
2000
1500
1000
5.15±0.1
5.15±0.1
NRS6010
(0.203±0.004)(0.203±0.004)
NR 6012
1.4±0.1
(0.055±0.004)
1.6±0.1
NR 6020
NR 6028
NR 6012
NR 6020
NR 6028
NR 6045
NR 6045
(0.063±0.004)
0.4±0.1
(0.016±0.004)
NR 8040
2.3±0.1
(0.090±0.004)
6.3±0.1
6.3±0.1
(0.248±0.004)(0.248±0.004)
3.1±0.1
(0.122±0.004)
②Tape Material
4.7±0.1
(0.185±0.004)
Unit : mm (inch)
◦Embossed tape 16mm wide (0.63 inches wide)
2.0±0.1
(0.079±0.004)
4.0±0.1
(0.157±0.004)
K
CHIP cavity
F
φ1.5±0.1
(0.059±0.004)
1.75±0.1
(0.069±0.004)
T
7.5±0.1
(0.295±0.004)
A
Electrode(bottom view)
③Taping dimensions
Chip cavity
Insertion pitch
F
Tape thickness
◦Embossed tape 8mm wide (0.315 inches wide)
Type
A
B
T
K
+0.1
ー0
CHIP cavity
φ1.5
1.75±0.1
(0.069±0.004)
8.3±0.1
8.3±0.1
12.0±0.1
0.5±0.1
4.5±0.1
K
+0.004
ー0
NR 8040
(0.059
)
(0.327±0.004) (0.327±0.004) (0.472±0.004) (0.020±0.004) (0.177±0.004)
T
Unit : mm (inch)
A
④Leader and Blank portion
◦NR, NRH, NRS, NRG, NRV
Blank portions
Chip cavity
Blank portions
Leader
Electrode(bottom view)
F
2.0±0.05
4.0±0.1
(0.079±0.002)(0.157±0.004)
Chip cavity
Insertion pitch
F
Tape thickness
Type
A
B
T
K
160mm or more
(6.3 inches or more)
100mm or more
(3.94 inches or more)
2.6±0.1
2.6±0.1
0.25±0.05
1.3±0.1
NRH 2410
(0.102±0.004)(0.102±0.004)
(0.009±0.002)(0.051±0.004)
NR 3010
NRH 3010
1.4±0.1
400mm or more
(15.8 inches or more)
(0.055±0.004)
4.0±0.1
NR 3012
NRH 3012
NRV3012
(0.157±0.004)
(0.126±0.004)(0.126±0.004)
Direction of tape feed
3.2±0.1
3.2±0.1
0.3±0.05
1.6±0.1
(0.012±0.002)(0.063±0.004)
1.9±0.1
(0.075±0.004)
NR 3015
Unit : mm (inch)
◦Embossed tape 12mm wide (0.47 inches wide)
+0.1
ー0
CHIP cavity
φ1.5
1.75±0.1
K
+0.004
ー0
(0.059
)
(0.069±0.004)
T
A
Electrode(bottom view)
F
2.0±0.1
4.0±0.1
(0.079±0.004)(0.157±0.004)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0405_pack_e-01
wound0405_pack-P1
■ PACKAGING
⑤Reel size
W
2±0.5
φ13±0.5
2.5 or less
(0.098inches
or less)
Reel size (Reference values)
Type
φD
φd
W
NRH2410
NR 3010
NRH 3010
180±0.5
(7.087±0.019)
60±1.0
(2.36±0.04)
10.0±1.5
(0.394±0.059)
NR 3012
NRH 3012
NRV 3012
NR 3015
NRS 5012
NRS 5014
NRS 5020
NRS 6010
NR 6012
180±3.0
(7.087±0.118)
60±2.0
(2.36±0.08)
14.0±1.5
(0.551±0.059)
Unit : mm (inch)
W
2±0.5
φ13±0.5
t
Reel size (Reference values)
Type
φD
φd
t (max.)
W
NR 4010
NR 4012
NR 4018
NRG 4026
NR 5040
NR 6020
NR 6028
NR 6045
18.5
(0.72)
13.5±1.0
(0.531±0.04)
330±3.0
80±2.0
(12.99±0.118) (3.15±0.078)
22.5
(0.89)
17.5±1.0
(0.689±0.04)
NR 8040
Unit : mm (inch)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as
illustrated below.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0405_pack_e-01
wound0405_pack-P2
SMD INDUCTORS LARGE CURRENT TYPE
■ FEATURES
■ APPLICATIONS
◦SMD inductor.
◦
Power supply circuits / DC-DC converters in a variety of applications such
as PDP TV, LCD TV, HDD, PC, etc.
◦It corresponds to High current.
◦Simple and original magnetic shield structure.
■ ORDERING CODE
N R △ 1 0 0 5 0 T △ 1 0 0 M △
❶
❷
❸
❹
❺
❻
❶Type
❷External dimensions
(W×H)
example
❸Packaging
Tape & Reel
❹Nominal inductance
〔μH〕
example
❺Inductance tolerance
❻Internal code
Standard product
NR△ Coating resin specification
△=Blank Space
T△
M
±20%
±30%
△
△=Blank Space
△=Blank Space
N
10050
10.0×5.0mm
1R3
1.3
100
10
101
100
※R=decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
■ AVAILABLE INDUCTANCE RANGE
Recommended Land Patterns
Surface Mounting
Type
NR 10050
Range
・Mounting and soldering conditions should be checked
beforehand.
Imax [A]
Rdc±30% [mΩ]
a
L
・Applicable soldering process to these products is reflow
soldering only.
1.0
10
9
6.8
25
W
b
b
4.5
4.1
H
2.6
5.4
2.6
Unit : mm
1.2
0.8
209
450
Standard
100
220
Quantity [pcs]
Type
L
W
H
a
b
Tape & Reel
10.0±0.3
9.8±0.5
5.0 max
4.0
(0.16)
1.75
(0.07)
NR 10050
500
(0.394±0.012)(0.386±0.020) (0.197 max)
Unit : mm (inch)
■ PART NUMBERS
●NR 10050 type
Rated current ※)[mA]
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
[MHz] (min.)
Measuring
frequency
[kHz]
Inductance Inductance
DC Resistance
[Ω] (±30%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
11000
10000
8200
7300
6600
6000
4700
3600
2600
2500
2000
1700
1300
1000
Idc2
9000
8300
7300
6800
6000
5200
4100
3200
2500
2100
1800
1500
1200
800
NR10050T1R3N
NR10050T2R1N
NR10050T2R9N
NR10050T3R8N
NR10050T4R9N
NR10050T6R5N
NR10050T100M
NR10050T150M
NR10050T220M
NR10050T330M
NR10050T470M
NR10050T680M
NR10050T101M
NR10050T221M
1.3
2.1
2.9
3.8
4.9
6.5
10
53
37
0.0068
0.008
0.0093
0.013
0.015
0.018
0.025
0.035
0.045
0.066
0.092
0.144
0.209
0.450
29
26
23
19
±30%
15
100
15
11
22
10
33
8.2
7.0
5.6
4.6
3.0
±20%
47
68
100
220
※)The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※)The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※)The maximum rated current is the DC current value that satisfies both of current value Saturation current value and temperature rise current value. (at 20℃)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound06_e-01
132
■ ELECTRICAL CHARACTERISTICS
DC Bias characteristics
■
(Measured by HP4285A)
NR 10050
1000.0
221M
100.0
101M
680M
470M
330M
220M
150M
10.0
100M
6R5N
4R9N
3R8N
2R9N
2R1N
1.0
1R3N
0.1
0.1
1.0
10.0
100.0
DC Bia〔s A〕
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound06_e-01
133
■ PACKAGING
①Minimum Quantity
⑥Top Tape Strength
Standard Quantity [pcs]
Tape & Reel
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as
illustrated below.
Type
NR 10050
500
②Tape Material
③Taping dimensions
◦Embossed tape 24mm wide (0.945 inches wide)
2.0±0.1
16.0±0.1
(0.079±0.004)
(0.63±0.004)
4.0±0.1
(0.157±0.004)
+0.1
φ1.5
ー0
+0.004
ー0
1.75±0.1
(0.069±0.004)
F
K
T
(0.059
)
B
+0.3
24.0ꢀꢀ
11.5±0.1
(0.453±0.004)
ー0.1
+0.012
A
(0.945ー0.004
)
Chip cavity
Insertion pitch
F
Tape thickness
Type
NR 10050
A
B
T
K
10.4±0.1
9.9±0.1
16.0±0.1
0.5±0.05
5.7±0.1
(0.409±0.004) (0.390±0.004) (0.630±0.004) (0.020±0.002) (0.224±0.004)
Unit : mm (inch)
④Leader and Blank portion
Chip cavity
Cover Tape Blank portions
Blank portions
40 to 50 pockets
Leader
100 to 200mm 20 to 30 pockets
1role of reel
(3.94 to 7.87
inches)
Direction of tape feed
⑤Reel size
25.5±1.0
(1.004±0.04)
2±0.5
(0.079±0.020)
φ13±0.5
(φ0.512±0.020)
t
Reel size (Reference values)
Type
NR 10050
φD
330±3
(12.99±0.118)
φd
80±2
(3.15±0.078)
t (max.)
30.5
(1.201)
Unit : mm (inch)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound06_pack_e-01
wound06_pack-P1
SMD INDUCTORS COMPACT TYPE
REFLOW
■ FEATURES
■ APPLICATIONS
◦BR C2518/BRFL2518 (NEW PRODUCTS)
◦For small DC/DC converter
(cellular phone, HDD, DVC, DSC, PDA, LCD display etc).
The best efficiency design is achieved by adopting bottom-surface elec-
trode structure.Small and low-profile Wound Chip Inductors that are suitable
for module design which needs high electric current like DC/DC converters.
■ ORDERING CODE
B R △ 2 5 1 8 T 2 R 2 M △ △ △
❶
❷
❸
❹
❺
❻
❼
❶Type
BR SMD Inductors
❷Characteristic Spec
❸External Dimensions
(W×L) : mm (inch)
❹Packaging
Tape & Reel
❺Nominal Inductance
〔μH〕
example
❻Inductance tolerance
△
L
T
M
±20%
±10%
Low Rdc
Low profile
1608 (0603)
1.6×0.8mm
2.0×1.2mm
2.0×1.6mm
2.5×1.8mm
3.2×2.5mm
K
2012 (0805)
2016 (0806)
2518 (1007)
3225 (1210)
R20
1R0
2R2
4R7
0.2
1.0
2.2
4.7
C
High Current
FL Low profile
❼Internal code
△△△ Standard product
△=Blank Space
※R=decimal point
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Standard Quantity [pcs]
L
W
Type
L
W
H
e
Paper Tape
Embossed Tape
1.6±0.2
0.8±0.2
0.8±0.2
0.45±0.15
BR C1608
BR L2012
BR C2016
BR C2518
BR L2518
BRFL2518
BR L3225
ー
3000
H
(0.063±0.008)(0.031±0.008)(0.031±0.008)(0.016±0.006)
2.0±0.2
1.25±0.2
1.0 max.
0.5±0.2
ー
ー
ー
ー
ー
ー
3000
2000
2000
3000
3000
e
(0.078±0.008)(0.049±0.008) (0.040 max.) (0.020±0.008)
2.0±0.2 1.6±0.2 1.6±0.2 0.5±0.2
(0.078±0.008)(0.063±0.008)(0.063±0.008)(0.020±0.008)
2.5±0.2 1.8±0.2 1.8±0.2 0.5±0.2
(0.098±0.008)(0.071±0.008)(0.071±0.008)(0.020±0.008)
2.5±0.2 1.8±0.2 1.2 max. 0.5±0.2
(0.098±0.008)(0.071±0.008) (0.048 max.) (0.020±0.008)
2.5±0.2 1.8±0.2 1.0 max. 0.5±0.2
(0.098±0.008)(0.071±0.008) (0.040 max.) (0.020±0.008)
3.2±0.2 2.5±0.2 1.7 max. 0.75±0.2
(0.126±0.008)(0.098±0.008) (0.068 max.) (0.030±0.008)
Recommended Land Patterns
Surface Mounting
・Mounting and soldering conditions should be
checked beforehand.
・Applicable soldering process to this products is
reflow soldering only.
2000
Unit : mm (inch)
C
Type
1608
2012
2016
2518
3225
A
B
C
0.55
0.65
0.70
0.65
1.00
0.80
0.90
0.80
1.50
1.60
0.90
1.40
A
B
A
1.80
1.95
2.70
Unit : mm
■ AVAILABLE INDUCTANCE RANGE
Type
BR L3225
BRFL2518
BR L2518
BR C2518
BR C2016
BR L2012
BR C1608
Range
Imax
[mA]
Rdc±30% Imax
Rdc±30% Imax
Rdc±30% Imax
Rdc±30% Imax
Rdc±30% Imax
[Ω] [mA]
Rdc±30% Imax
Rdc±30%
[Ω] [mA]
[Ω] [mA]
[Ω] [mA]
[Ω] [mA]
[Ω] [mA]
[Ω]
0.2μH
0.47μH
980
0.060
1,050
0.090
2,200
1μH
0.043
0.350
2.50
1,200
1μH
0.080
1,000
850
1μH
0.080
1,650
610
1μH
0.050
1,100
520
1μH
0.085
0.400
850
0.135
0.850
520
280
0.180
0.550
1.0
2.2
850
0.135
0.135
2.2μH
4.7
470
0.400
650
0.330
4.7μH
4.7μH
700
250
0.350
270
10
22
47
100
220
100μH
190
100μH
3.60
170
100μH
3.40
85
100μH
7.70
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound07_e-01
134
■ PART NUMBERS
●BR C1608 type
Rated current ※)[mA]
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
[MHz] (min.)
Measuring
frequency
[MHz]
Inductance Inductance
DC Resistance
[Ω] (±30%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
1,750
1,400
1,250
1,150
1,000
850
Idc2
980
810
800
760
660
520
410
280
BR C1608TR20M
BR C1608TR35M
BR C1608TR45M
BR C1608TR56M
BR C1608TR77M
BR C1608T1R0M
BR C1608T1R5M
BR C1608T2R2M
0.20
0.35
0.45
0.56
0.77
1.00
1.50
2.20
400
300
200
170
150
140
120
100
0.060
0.080
0.090
0.095
0.110
0.180
0.300
0.550
±20%
7.96
700
550
●BR L2012 type
Rated current ※)[mA]
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
[MHz] (min.)
Measuring
frequency
[MHz]
Inductance Inductance
DC Resistance
[Ω] (±30%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
1,100
850
700
600
490
340
290
270
220
190
150
125
100
85
Idc2
1,050
850
750
550
440
400
350
330
300
270
220
160
110
BR L2012TR47M
BR L2012T1R0M
BR L2012T1R5M
BR L2012T2R2M
BR L2012T3R3M
BR L2012T4R7M
BR L2012T6R8M
BR L2012T100M
BR L2012T150M
BR L2012T220M
BR L2012T330M
BR L2012T470M
BR L2012T680M
BR L2012T101M
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
350
300
250
200
190
150
60
0.090
0.135
0.180
0.300
0.500
0.550
0.750
0.850
1.00
7.96
±20%
30
15
15
22
13
1.30
2.52
33
8.0
7.0
6.5
6.0
2.00
47
3.50
68
5.80
100
7.70
85
0.796
●BR C2016 type
Rated current ※)[mA]
Saturation current Temperature rise current
EHS (Environmental
Hazardous
Self-resonant
frequency
[MHz] (min.)
Measuring
frequency
[MHz]
Inductance Inductance
DC Resistance
[Ω] (±30%)
Ordering code
[μH]
Tolerance
Substances
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
)
Idc1
1,350
1,100
910
Idc2
1,100
820
760
680
610
560
520
410
310
240
210
190
170
BR C2016T1R0M
BR C2016T1R5M
BR C2016T2R2M
BR C2016T3R3M
BR C2016T4R7M
BR C2016T6R8M
BR C2016T100□
BR C2016T150□
BR C2016T220□
BR C2016T330□
BR C2016T470□
BR C2016T680□
BR C2016T101□
1.0
1.5
2.2
3.3
4.7
6.8
10
450
370
250
140
78
39
35
28
24
13
0.085
0.150
0.180
0.220
0.270
0.330
0.400
0.600
1.00
±20%
740
660
550
450
400
310
0.10
15
22
±20%
±10%
33
1.70
270
210
47
11
2.20
68
8
2.80
200
140
100
7
3.40
●BR C2518 type
Rated current ※)[mA]
Saturation Temperature rise
current current
EHS (Environmental
Hazardous
Self-resonant
frequency
[MHz] (min.) [Ω] (±30%)
DC
Resistance
Measuring
frequency
[MHz]
Inductance
[μH]
Inductance
Tolerance
Ordering code
Substances
)
Idc1
2,550
2,100
1,800
1,450
1,250
1,050
890
Idc2
1,650
1,300
1,000
860
BR C2518T1R0M
BR C2518T1R5M
BR C2518T2R2M
BR C2518T3R3M
BR C2518T4R7M
BR C2518T6R8M
BR C2518T100□
BR C2518T150□
BR C2518T220□
BR C2518T330□
BR C2518T470□
BR C2518T680□
BR C2518T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
280
230
200
150
100
45
0.050
0.080
0.120
0.175
0.230
0.280
0.350
0.43
±20%
750
680
20
610
1.00
15
13
760
550
22
10
0.56
640
490
±20%
±10%
33
8
0.85
560
390
47
6.5
5.5
4.5
1.45
410
300
68
2.40
340
230
100
3.60
300
190
・Please specify the inductance tolerance code. (M or K)
※)The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※)The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※)The rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound07_e-01
135
■ PART NUMBERS
●BR L2518 type
Rated current ※)[mA]
Saturation Temperature rise
current current
EHS (Environmental
Hazardous
Self-resonant
frequency
[MHz] (min.) [Ω] (±30%)
DC
Resistance
Measuring
frequency
[MHz]
Inductance
[μH]
Inductance
Tolerance
Ordering code
Substances
)
Idc1
1,300
1,200
900
Idc2
1,000
920
BR L2518T1R0M
BR L2518T1R5M
BR L2518T2R2M
BR L2518T3R3M
BR L2518T4R7M
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
130
100
80
0.080
0.100
0.135
0.300
0.400
±20%
850
7.96
70
750
580
60
650
470
●BRFL2518 type
Rated current ※)[mA]
Saturation Temperature rise
current current
EHS (Environmental
Hazardous
Self-resonant
frequency
[MHz] (min.) [Ω] (±30%)
DC
Resistance
Measuring
frequency
[MHz]
Inductance
[μH]
Inductance
Tolerance
Ordering code
Substances
)
Idc1
1,200
1100
850
Idc2
1,200
1000
950
BRFL2518T1R0M
BRFL2518T1R5M
BRFL2518T2R2M
BRFL2518T3R3M
BRFL2518T4R7M
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
130
100
80
0.090
0.110
0.130
0.220
0.330
±20%
1.00
70
700
700
60
650
650
●BR L3225 type
Rated current ※)[mA]
Saturation Temperature rise
current current
EHS (Environmental
Hazardous
Self-resonant
frequency
[MHz] (min.) [Ω] (±30%)
DC
Resistance
Measuring
frequency
[MHz]
Inductance
[μH]
Inductance
Tolerance
Ordering code
Substances
)
Idc1
2,400
2,200
1,850
1,450
1,300
1,050
900
Idc2
2,200
1,750
1,600
1,200
1,000
770
BR L3225T1R0M
BR L3225T1R5M
BR L3225T2R2M
BR L3225T3R3M
BR L3225T4R7M
BR L3225T6R8M
BR L3225T100□
BR L3225T150□
BR L3225T220□
BR L3225T330□
BR L3225T470□
BR L3225T680□
BR L3225T101□
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
220
170
150
140
120
90
70
20
13
9
0.043
0.045
0.065
0.120
0.180
0.270
0.350
0.570
0.690
0.840
1.00
±20%
700
0.10
15
700
530
22
550
470
±20%
±10%
33
470
420
47
7
420
390
68
6
1.40
330
300
100
5
2.50
270
250
・Please specify the inductance tolerance code. (M or K)
※)The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※)The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※)The rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound07_e-01
136
■ ELECTRICAL CHARACTERISTICS
DC Bias characteristics
■
(Measured by HP4285A)
BRL3225
BRC2518
101□
BRFL2518
BRL2518
100
10
10
10
101□
4R7M
4R7M
10
1
10
100□
100□
2R2M
2R2M
1R0M
1
1
1R0M
1R0M
1
1R0M
0.1
0.1
0.1
0.1
1
10
100
1000 10000
1
10
100
1000 10000
1
10
100
1000 10000
1
10
100
1000 10000
DC BIAS(mA)
DC BIAS(mA)
DC BIAS(mA)
DC BIAS(mA)
BRC2016
BRL2012
BRC1608
100
10
1000
100
10
101□
2R2M
101M
10
1
100□
1
100M
R77M
1R0M
1
1R0M
R20M
0.1
0.1
0.1
1
10
100
1000 10000
1
10
100
1000 10000
1
10
100
1000 10000
DC BIAS(mA)
DC BIAS(mA)
DC BIAS(mA)
Impedance-vs-Frequency characteristics
■
(Measured by HP4291A)
BRC2518
BRL3225
100000
BRFL2518
4R7M
BRL2518
100000
10000
1000
10000
1000
10000
1000
4R7M
2R2M
101□
101□
2R2M
100□
10000
100□
1R0M
1R0M
1000
1R0M
100
10
1
100
10
1
1R0M
100
100
10
1
10
1
1
10
100
1000 10000
1
10
100 1000 10000
1
10
100 1000 10000
1
10
100
1000
Frequenc(y MHz)
Frequenc(y MHz)
Frequenc(y MHz)
Frequenc(y MHz)
BRC2016
BRL2012
BRC1608
2R2M
100000
10000
10000
1000
100
100000
10000
1000
101M
100M
101□
100□
1R0M
R77M
1000
100
10
1R0M
R20M
1000
10
1
1
10
1
0.1
0.1
1
10
100
1000
1
10
100
1000
1
10
100
1000
Frequenc(y MHz)
Frequenc(y MHz)
Frequenc(y MHz)
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound07_e-01
137
■ PACKAGING
①Minimum Quantity
Type
⑤Reel size
Standard Quantity [pcs]
Paper Tape
Embossed Tape
3,000
2.5 or less
(0.098max)
BR C1608
BR L2012
BR C2016
BR C2518
BR L2518
BRFL2518
BR L3225
ー
ー
ー
ー
ー
ー
ー
3,000
2,000
2,000
3,000
3,000
2,000
②Tape Material
10.0±1.5
(0.394±0.059)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.2 to 0.7N in the direction of the arrow as
illustrated below.
③Taping dimensions
◦Embossed Tape
8mm wide (0.315 inches wide)
◦Card board carrier tape 8mm wide (0.315 inches wide)
Chip cavity
Insertion pitch
Tape thickness
Type
A
B
F
T
K
1.0±0.10
1.9±1.0
4.0±0.1
0.25±0.05
1.2 max.
BR C1608
BR L2012
BR C2016
BR C2518
BR L2518
BRFL2518
BR L3225
(0.04±0.004)(0.076±0.004)(0.157±0.004)(0.01±0.002) (0.047)
1.40±0.1
2.2±0.1
4.0±0.1
0.25±0.05
1.2 max.
(0.056±0.004)(0.088±0.004)(0.157±0.004)(0.01±0.002) (0.048)
1.75±0.1 2.1±0.1 4.0±0.1 0.3±0.05 1.9 max.
(0.069±0.004)(0.083±0.004)(0.157±0.004)(0.012±0.002) (0.074)
2.15±0.1 2.7±0.1 4.0±0.1 0.3±0.05 2.2 max.
(0.085±0.004)(0.107±0.004)(0.157±0.004)(0.012±0.002) (0.086)
2.3±0.1 2.8±0.1 4.0±0.1 0.3±0.05 1.45 max.
(0.092±0.004)(0.112±0.004)(0.157±0.004)(0.012±0.002) (0.057)
2.15±0.1
2.8±0.1
4.0±0.1
0.25±0.05
1.25 max.
(0.049)
1.9 max.
(0.085±0.004)(0.112±0.004)(0.157±0.004)(0.01±0.002)
2.8±0.1
3.5±0.1
4.0±0.1
0.25±0.05
(0.112±0.004)(0.140±0.004)(0.157±0.004)(0.01±0.002) (0.074)
Unit : mm (inch)
④Leader and Blank portion
Blank portions
Chip cavity
Blank portions
Leader
160 to 320mm
160 to 200 mm
(6.3 to 12.8 inches)
(6.3 to 7.87 inches)
400 to 560 mm
(16.0 to 22.4 inches)
Direction of tape feed
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound07_pack_e-01
wound07_pack-P1
■ RELIABILITY DATA
1. Operating Temperature Range
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
ー25~+105℃
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
ー25~+120℃
ー25~+105℃
NR10050 Type
【Test Method and Remarks】
Including self-generated heat
2. Storage Temperature Range
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
ー40~+85℃
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : 0 to 40℃ for the product with taping.
NR10050 Type : 0~40℃ for the product with taping.
3. Rated current
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Within the specified tolerance
NR10050 Type
4. Inductance
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Within the specified tolerance
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : LCR Meter : HP 4285A or equivalent, Measuring frequency : Specified frequency
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : LCR Meter : HP 4285A or equivalent, 100KHz, 1V
NR10050 Type
: LCR Meter : HP 4263A or equivalent, 100KHz, 1V
5. DC Resistance
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Within the specified tolerance
NR10050 Type
【Test Method and Remarks】
DC ohmmeter : HIOKI 3227 or equivalent
6. Self resonance frequency
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Within the specification
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
Inpedance analyzer/material analyzer : HP4291A or equivalent HP4191A, 4192A or equivalent
7. Temperature characteristic
BRL2012, BRC2016, BRL2518, BRL3225, BRC2518, BRFL2518
Inductance change : Within ±15%
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
BRC1608
Inductance change : Within ±20%
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ±20%
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
Measurement of inductance shall be taken at temperature range within -25℃~+85℃.
With reference to inductance value at +20℃., change rate shall be calculated.
Change of maximum inductance deviation in step 1 to 5
Temperature at step 1
Temperature at step 2
Temperature at step 3
Temperature at step 4
Temperature at step 5
20℃
Minimum operating temperature
20℃ (Standard temperature)
Maximum oparating temperature
20℃
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP1
■ RELIABILITY DATA
8. Resistance to flexure of substrate
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
No damage.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type
:
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board
reaches to 2 mm.
Force Rod
20
10
Test board size
Test board material
: 100×40×1.0
: glass epoxy-resin
R230
Solder cream thickness : 0.12 (BR Series)
0.10 (NR30/40, NRV30, NRH24/30,NRG40)
0.15 (NR50/60/80, NRS50/60)
Board
Test Sample
R5
45±2mm
45±2mm
Land dimension(NR, NRS50)
Land dimension(BRL2012)
Land dimension(BRC1608)
Land dimension(BRL3225)
Land dimension(NR60, NRS60)
Land dimension(NR30, NRH30, NRV30)
0.9
4.0
1.4
2.7
2.7
5.7
0.8
0.55
0.55
1.5 2.1 1.5
0.8 1.4 0.8
1.6 3.1 1.6
0.65 0.9 0.65
1.0 1.6 1.0
Land dimension(BRL2518,BRC2518,BRFL2518) Land dimension(NRH24)
1.95 2.0
Land dimension(NR40, NRG40) Land dimension(NR80)
Land dimension(BRC2016)
3.7
7.5
1.8
0.7 0.8 0.7
0.65 1.5 0.65
0.7 0.75 0.7
1.2 1.6 1.2
1.8 3.8 1.8
Printed board thickness : 1.0mm
Unit : mm
9. Insulation resistance : between wires
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
10. Insulation resistance : between wire and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
11. Withstanding voltage : between wires and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
12. Adhesion of terminal electrode
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Shall not come off PC board.
NR10050 Type
【Test Method and Remarks】
BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type
The test samples shall be soldered to the test board by the reflow.
:
・Applied force
: 10N to X and Y directions.
: 5s.
・Duration
10N, 5s
・Solder cream thickness : 0.15mm.
BRC1608, NR10050 Type :
・Applied force : 5N to X and Y directions.
・Duration
: 5s.
13. Resistance to vibration
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Frequency Range
Total Amplitude
10~55Hz
1.5mm (May not exceed acceleration 196m/s2)
Sweeping Method
10Hz to 55Hz to 10Hz for 1min.
X
Time
Y
Z
For 2 hours on each X, Y, and Z axis.
Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP2
■ RELIABILITY DATA
14. Solderability
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
At least 90% of surface of terminal electrode is covered by new solder.
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050Type :
The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.
Flux : Methanol solution containing rosin 25%.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
Solder Temperature
Time
245±5℃
5±1.0 sec.
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Solder Temperature
Time
245±5℃
5±0.5 sec.
※Immersion depth : All sides of mounting terminal shall be immersed.
15. Resistance to soldering heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
3 times of reflow oven at 230℃ MIN. for 40sec. with peak temperature at 260ー+05 ℃ for 5sec.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type
:
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.
NR6020 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 250ー+05 ℃ for 5 seconds, 2 times.
Test board thickness : 1.0mm
Test board material : glass epoxy-resin
16. Thermal shock
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
NR30/40/50/60/80, NRV30, NRG40,
No significant abnormality in appearance.
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown
in below table in sequence. The temperature cycle shall be repeated 100 cycles.
Conditions of 1 cycle
Step
Temperature (℃)
ー40±3
Room temperature
Duration (min)
30±3
Within 3
1
2
3
4
+85±2
Room temperature
30±3
Within 3
17. Damp heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Humidity
Time
60±2℃
90~95%RH
1000 hours.
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table.
Temperature
Humidity
Time
60±2℃
90~95%RH
500±24hour
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP3
■ RELIABILITY DATA
18. Loading under damp heat
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Humidity
60±2℃
90~95%RH
Rated current
1000hours.
Applied current
Time
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table.
Temperature
Humidity
60±2℃
90~95%RH
Rated current
500±2hour
Applied current
Time
19. Low temperature life test
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Duration
ー40±2℃
1000hours
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
After that, the test samples shall be placed at test conditions as shown in below table.
Temperature
Time
-40±3℃
500±24hour
20. High temperature life test
BRC1608, BRL2012, BRC2016, BRC2518, Inductance change : Within ±10%
BRFL2518, BRL2518, BRL3225 Type
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
【Test Method and Remarks】
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :
Temperature
Duration
85±2℃
1000hours
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
NR10050 Type :
Temperature
Time
105±3℃
500±24hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
21. Loading at high temperature life test
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ±10%
No significant abnormality in appearance.
NR10050 Type
【Test Method and Remarks】
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow soldering.
Temperature
Applied current
Time
85±2℃
Rated current
500±24hour
22. Standard condition
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
Standard test condition :
Unless otherwise specified, temperature is 20±15% and 65±20%of relative humidity.
When there are question concerning measurement result : In order to provide correlation date, the test shall be condition of 20±2℃
of temperature, 65±5% relative humidity.
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance is in accordance with our measured value.
NR10050 Type
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP4
■ PRECAUTIONS
SMD Inductors
1. Circuit Design
◆Operating environment
1.The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
Precautions
2. PCB Design
◆Land pattern design
1.Please refer to a recommended land pattern.
Precautions
◆Land pattern design
Technical
consider-
ations
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to this products is reflow soldering only.
3. Considerations for automatic placement
◆Adjustment of mounting machine
1.Excessive impact load should not be imposed on the products when mounting onto the PC boards.
Precautions
2.Mounting and soldering conditions should be checked beforehand.
Technical
consider-
ations
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
Precautions
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
2. This products is reflow soldering only.
3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering.
◆Lead free soldering
1.When using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to soldering heat, soldering etc
sufficiently.
◆Recommended conditions for using a soldering iron (NR10050 Type)
・Put the soldering iron on the land-pattern.
・Soldering iron's temperature - Below 350℃
・Duration - 3 seconds or less
・The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of
the products.
・BRC1608, BRL2012, BRL2518,
BRC2016, BRL3225 Type BRC2518, BRFL2518
Recommended reflow condition (Pb free solder)
・NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Recommended reflow condition (Pb free solder)
・NR10050 Type
Recommended reflow condition (Pb free solder)
Technical
consider-
ations
5sec max
300
5sec max
300
5sec max
300
200
100
Peak:
Peak:
Peak:
150~180
150~180
150~180
260+0/ー5℃
250+0/ー5℃
250+5/ー0℃
200
200
100
30±10sec
30±10sec
230℃ min
30±10sec
230℃ min
100
230℃ min
90±30sec
90±30sec
90±30sec
0
0
0
Heating Time【sec】
Heating Time【sec】
Heating Time【sec】
5. Cleaning
Precautions
◆Cleaning conditions
1. Washing by supersonic waves shall be avoided.
Technical
consider-
ations
◆Cleaning conditions
1. If washing by supersonic waves, supersonic waves may cause broken products.
6. Handling
Precautions
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
◆Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.。
◆Packing
1. Please avoid accumulation of a packing box as much as possible.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
Technical
consider-
ations
1. There is a case to be damaged by a mechanical shock.
2. There is a case to be broken by the handling in transportation.
◆Pick-up pressure
1. Damage and a characteristic can vary with an excessive shock or stress.
◆Packing
1. There is a case that transformation and a product of tape are damaged by accumulation of a packing box.
7. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should
be controlled.
・Recommended conditions
Ambient temperature: 0~40℃
Precautions
Humidity
: Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.
For this reason, product should be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
Technical ◆Storage
consider-
ations
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01
wound0407_reli-RP5
LBC3225T3R3MR 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
LBC3225T3R3MRV | TAIYO YUDEN | General Purpose Inductor, | 获取价格 | |
LBC3225T3R3MRV_V01 | TAIYO YUDEN | Wire-wound Chip Inductors for Medical / Industrial Applications (LB series)[LBC] | 获取价格 | |
LBC3225T470KR | TAIYO YUDEN | General Purpose Inductor, 47uH, 10%, 1 Element, Ferrite-Core, SMD, 1210, CHIP, 1210, ROHS COMPLIANT | 获取价格 | |
LBC3225T470KRV | TAIYO YUDEN | Wire-wound Chip Inductors for Medical / Industrial Applications (LB series)[LBC] | 获取价格 | |
LBC3225T470KRV_V01 | TAIYO YUDEN | Wire-wound Chip Inductors for Medical / Industrial Applications (LB series)[LBC] | 获取价格 | |
LBC3225T470KR_19 | TAIYO YUDEN | Wire-wound Chip Inductors (LB series)[LBC] | 获取价格 | |
LBC3225T470MR | TAIYO YUDEN | Wire-wound Chip Inductors (LB series)[LBC] | 获取价格 | |
LBC3225T470MRV | TAIYO YUDEN | Wire-wound Chip Inductors for Medical / Industrial Applications (LB series)[LBC] | 获取价格 | |
LBC3225T470MRV_V01 | TAIYO YUDEN | Wire-wound Chip Inductors for Medical / Industrial Applications (LB series)[LBC] | 获取价格 | |
LBC3225T470MR_19 | TAIYO YUDEN | Wire-wound Chip Inductors (LB series)[LBC] | 获取价格 |
LBC3225T3R3MR 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6